Table of Contents

Biochar, from spruce wood pyrolysis — CH

Dataset documentation and final control (tdc-doc, imported mode)
Open this dataset in OpenData

Abstract. BAFU 2026 v1 (Swiss Federal Office for the Environment). Dataset Biochar, from spruce wood pyrolysis [CH], per 1 kg. EF v3.1 climate change 0.2713 kg CO2 eq (Monte Carlo 95 % interval 0.2031–0.3923). Main contributors: Spruce wood, chipping and drying 75 %; Heat, natural gas, at industrial furnace 1MW 23 %; Electricity, low voltage, at grid 2 %. Status: final control: 0 failed, 1 warning(s) (Section 7).
Item Value
Dataset name Biochar, from spruce wood pyrolysis
Dataset UUID / graph id e6357fcb-9ae0-3792-b8ed-4c935d89a505 / activity:biochar_from_spruce_wood_pyrolysis__ch
Reference product, unit Biochar, from spruce wood pyrolysis, 1 kg
Location CH
Time period 2024/2024
Category chemicals / gases\transformation
Source database BAFU 2026 v1 (Swiss Federal Office for the Environment), version 2026 v1
Publisher Swiss Federal Office for the Environment (FOEN/BAFU)
Background database BAFU 2026 v1 (graph bafuquery-db)
LCIA method EF v3.1, consensus-flow-list implementation, 25 categories (bw2calc on the graph matrix)
Status final control: 0 failed, 1 warning(s) (Section 7)
Documented by tdc-doc, imported mode (graph recalculation, Monte Carlo, final control), 2026-11-17

Introduction

This dataset represents the production of 1 kilogram of biochar through slow pyrolysis. Biochar yield of 27.9% (of the dry feedstock), bio-oil (55%) and gas (17%). Annual plant capacity: 10'000 t fresh feedstock = 6000 t dry feedstock. The energy needed for pyrolysis, excluding drying (273.59 GJ electricity and 1316.65 GJ of thermal energy required to produce 1673.33 t biochar), was back-calculated from data in Tisserant, A., Morales, M., Cavalett, O., O'Toole, A., Weldon, S., Rasse, D. P., & Cherubini, F. (2022). Life-cycle assessment to unravel co-benefits and trade-offs of large-scale biochar deployment in Norwegian agriculture. Resources, Conservation and Recycling, 179, 106030. https://doi.org/10.1016/j.resconrec.2021.106030, using their supplementary information. Using the cutoff approach for the byproducts. The yield of biochar is calculated on a dry ash-free basis (DAF) using the following formula: 0.126+0.273(FSlignin/100)+0.539EXP(-0.004*Tp, C) where: - FS lignin represents the Lignin content of the feedstock, which is expressed as a percentage. - Tp, C is pyrolysis temperature (°C) - exp(−0.004â‹…T p, C ) represents an exponential decay factor (biochar yield decreases with increasing pyrolysis temperature) The carbon content of biochar is calculated as a fraction of the dry ash-free biochar using the following formula: 0.93−0.92â‹…exp(−0.0042â‹…T p, C) where Tp, C is pyrolysis temperature (°C) and exp(−0.0042â‹…Tp, C): Exponential decay (carbon content stabilizes at higher temperatures) The oxygen content of biochar is calculated as a fraction of the dry ash-free biochar using the following formula: −0.0041+0.1â‹…exp(−0.0024â‹…T p, C ). exp(−0.0024â‹…T p, C) represents an exponential decay (oxygen content decreases with increasing pyrolysis temperature). The hydrogen content of biochar is calculated using the following formula: 0.07+0.85â‹…exp(−0.0048â‹…T p, C) The gaseous yields such as CO, H2, CH4, C2H2 are also calculated using the respective formulas: (CO) (0.043/(1+exp(17.2−0.03â‹…T p,K )))+(0.317/(1+exp(10.9−0.01â‹…T p,K))) (H2) 0.0295â‹…(1−exp(−0.0035â‹…T p,K ))^62.98 (CH4) 0.0782â‹…(1−exp(−0.00338â‹…T p,K))^30.15 (C2H2) 0.036â‹…(1−exp(−0.00522â‹…T p, K ))^154.97, pyrolysis temperature in this case is expressed in Kelvin. A matrix is used to allocate the elemental components (C, O, H) of the feedstock into the pyrolysis products: tar, COâ‚‚, and Hâ‚‚O. The use of the matrix ensures mass conservation for each element (C, O, H) and allows the calculation of yields for tar, COâ‚‚, and Hâ‚‚O based on the initial feedstock composition. The calculations result in bio-oil yields (55% yield, DAF) with an HHV of 16.3 GJ/Mg and of the pyrolysis Gas (17% yield, DAF) with an HHV of 6.8 GJ/Mg. Source: Hoeskuldsdottir, Gudrun. 2022. Life Cycle Assessment of Biochar to Soil Systems: A Parametric Analysis. Master’s thesis, Swiss Federal Institute of Technology Zürich and Paul Scherrer Institute. UUID: e635…

This report documents an imported dataset: its inventory and metadata come from the publisher, not from the tdc pipeline. tdc-doc recomputes it on the graph, checks it (Section 7), and reports it in the ISO 14044 / BAFU DQR v2.1 structure used for tdc's own datasets. Sections that only apply to datasets built by tdc (stoichiometry, energy model, literature excerpts) are replaced by what the publisher declares.

Goal and scope

Function, functional unit and reference flow

Reference flow: 1 kg of Biochar, from spruce wood pyrolysis (CH). All results are given per unit of the reference flow.

System boundary

—

Technology

—

Native BAFU dataset: exchanges as delivered in EcoSpold v1, linked by the graph migration (graphlca.load).

LCIA method

EF v3.1, characterisation only (no normalisation or weighting), consensus-flow-list implementation of the 25 categories, with regionalised factors where the flow carries a place.

Life cycle inventory

Inventory table

Direct exchanges per reference flow, ordered by their share of climate change. Uncertainty: the distribution declared on the graph edge (BAFU: lognormal from the pedigree matrix). Pedigree: the scores the publisher declares (BAFU: reliability, completeness, temporal, geographical, technological, sample size; PEF DQR otherwise).

Exchange Type Location / compartment Amount Unit Uncertainty Pedigree GWP share (%) Notes
Spruce wood, chipping and drying technosphere CH 1.62 kg lognormal, GSD² 1.4 — 75.1 ███████████████
Heat, natural gas, at industrial furnace 1MW technosphere CH 0.78685 MJ lognormal, GSD² 1.24 — 23.3 █████
Electricity, low voltage, at grid technosphere CH 0.045417 kWh lognormal, GSD² 1.4 — 1.6 ·
Mini CHP plant, common components for heat+electricity technosphere CH 2.9881e-08 p none declared: tdc-doc default ±50 % — 0.0 ·

Data quality

0 of 4 direct exchanges carry a declared pedigree, 3 carry a distribution.

Field As declared by the publisher
Data generator / entry / validation data generator: Romain Sacchi (PSI); data entry: Romain Sacchi (PSI); validation (proof reading): Pierryves Padey (FOEN)
sampling procedure Sampling procedure: Literature data
validation details Proof reading validation: Passed, Other validation: none, Validator: Pierryves Padey, Telephone: +41 58 462 93 11, E-mail: pierryves.padey@bafu.admin.ch, Company: Federal Office for the Environment, Country: CH

Data gaps, proxies and assumptions

Item Class Value used Reason Effect
1 exchange(s) without declared uncertainty uncertainty fixed in the Monte Carlo the publisher declares no distribution ±50 % in the sensitivity check (Section 6.3)

Life cycle impact assessment (EF v3.1)

Per 1 kg. The 95 % interval and GSD² come from the Monte Carlo of Section 6.4.

Impact category Indicator Unit Result 2.5 % 97.5 % GSD²
Acidification Accumulated Exceedance (AE) mol H+ eq 3.488e-04 2.627e-04 5.553e-04 1.46
Climate change-Biogenic Radiative forcing as Global Warming Potential (GWP100) kg CO2 eq 3.397e-04 2.362e-04 8.688e-04 1.9
Climate change-Fossil Radiative forcing as Global Warming Potential (GWP100) kg CO2 eq 0.2709 0.2026 0.3919 1.41
Climate change-Land use and land use change Radiative forcing as Global Warming Potential (GWP100) kg CO2 eq 7.599e-05 5.861e-05 1.232e-04 1.47
Climate change Radiative forcing as Global Warming Potential (GWP100) kg CO2 eq 0.2713 0.2031 0.3923 1.41
EF-particulate Matter Impact on human health disease incidence 1.807e-09 1.552e-09 3.348e-09 1.51
Ecotoxicity, freshwater_inorganics Comparative Toxic Unit for ecosystems (CTUe) CTUe 0.8215 0.4694 2.324 2.25
Ecotoxicity, freshwater_organics Comparative Toxic Unit for ecosystems (CTUe) CTUe 0.04505 0.03321 0.07909 1.56
Ecotoxicity, freshwater Comparative Toxic Unit for ecosystems (CTUe) CTUe 0.8666 0.5072 2.381 2.19
Eutrophication marine Fraction of nutrients reaching marine end compartment (N) kg N eq 1.723e-04 1.272e-04 2.707e-04 1.46
Eutrophication, freshwater Fraction of nutrients reaching freshwater end compartment (P) kg P eq 1.677e-05 1.056e-05 7.397e-05 2.68
Eutrophication, terrestrial Accumulated Exceedance (AE) mol N eq 0.001596 0.001169 0.002493 1.47
Human toxicity, cancer_inorganics Comparative Toxic Unit for human (CTUh) CTUh 1.012e-11 1.064e-11 2.976e-11 1.71
Human toxicity, cancer_organics Comparative Toxic Unit for human (CTUh) CTUh 8.716e-11 6.072e-11 1.419e-10 1.54
Human toxicity, cancer Comparative Toxic Unit for human (CTUh) CTUh 9.728e-11 7.523e-11 1.654e-10 1.51
Human toxicity, non-cancer_inorganics Comparative Toxic Unit for human (CTUh) CTUh 7.284e-10 7.063e-10 1.979e-09 1.7
Human toxicity, non-cancer_organics Comparative Toxic Unit for human (CTUh) CTUh 1.108e-10 8.366e-11 1.878e-10 1.51
Human toxicity, non-cancer Comparative Toxic Unit for human (CTUh) CTUh 8.392e-10 8.006e-10 2.143e-09 1.66
Ionising radiation, human health Human exposure efficiency relative to U235 kBq U235 eq 0.06352 0.02335 0.3842 4.29
Land use Soil quality index pt (soil quality index) 236.2 170 325.1 1.39
Ozone depletion Ozone Depletion Potential (ODP) kg CFC-11 eq 8.404e-09 5.378e-09 1.634e-08 1.75
Photochemical ozone formation - human health Tropospheric ozone concentration increase kg NMVOC eq 0.00136 9.894e-04 0.002076 1.46
Resource use, fossils Abiotic resource depletion fossil fuels (ADP-fossil) MJ 4.614 2.96 8.506 1.69
Resource use, minerals and metals Abiotic resource depletion (ADP ultimate reserve) kg Sb eq 1.975e-07 1.534e-07 4.688e-07 1.73
Water use User deprivation potential (deprivation-weighted water consumption) m3 world eq deprived 0.008039 -29.23 16.35 —

Climate change 0.2713 kg CO2 eq per kg. Main contributors: Spruce wood, chipping and drying 75 %; Heat, natural gas, at industrial furnace 1MW 23 %; Electricity, low voltage, at grid 2 %.

Interpretation

Significant issues

Direct exchanges dominating climate change: Spruce wood, chipping and drying 75 %; Heat, natural gas, at industrial furnace 1MW 23 %; Electricity, low voltage, at grid 2 %. Most sensitive exchanges (Section 6.3): Spruce wood, chipping and drying [CH] (-20.9 / +29.0 %); Heat, natural gas, at industrial furnace 1MW [CH] (-4.4 / +5.5 %); Electricity, low voltage, at grid [CH] (-0.5 / +0.6 %).

Independent recalculation

Graph result against BAFU 2026 v1 published EF 3.1 results (LCIA Results.xlsx, June 2026):

Category Graph Published Graph / published
Acidification 3.488e-04 3.886e-04 0.898
Climate change-Biogenic 3.397e-04 3.397e-04 1.000
Climate change-Fossil 0.2709 0.2709 1.000
Climate change-Land use and land use change 7.599e-05 7.599e-05 1.000
Climate change 0.2713 0.2713 1.000
EF-particulate Matter 1.807e-09 1.807e-09 1.000
Ecotoxicity, freshwater_inorganics 0.8215 0.8245 0.996
Ecotoxicity, freshwater_organics 0.04505 0.04501 1.001
Ecotoxicity, freshwater 0.8666 0.8691 0.997
Eutrophication marine 1.723e-04 1.723e-04 1.000
Eutrophication, freshwater 1.677e-05 1.677e-05 1.000
Eutrophication, terrestrial 0.001596 0.001711 0.933
Human toxicity, cancer_inorganics 1.012e-11 9.860e-12 1.026
Human toxicity, cancer_organics 8.716e-11 8.716e-11 1.000
Human toxicity, cancer 9.728e-11 9.702e-11 1.003
Human toxicity, non-cancer_inorganics 7.284e-10 7.182e-10 1.014
Human toxicity, non-cancer_organics 1.108e-10 1.107e-10 1.000
Human toxicity, non-cancer 8.392e-10 8.289e-10 1.012
Ionising radiation, human health 0.06352 0.06352 1.000
Land use 236.2 139 1.700
Ozone depletion 8.404e-09 8.404e-09 1.000
Photochemical ozone formation - human health 0.00136 0.00136 1.000
Resource use, fossils 4.614 4.614 1.000
Resource use, minerals and metals 1.975e-07 1.788e-07 1.105
Water use 0.008039 0.009327 0.862
Over all BAFU datasets, climate change agrees with the published table for 98.1 % of them within ±5 % (median ×1.000). Systematic differences are expected where the graph characterises differently from BAFU's table: regionalised factors (acidification, terrestrial eutrophication, land use, water use, by the flow's place) and the metal resource factors; these categories: Acidification median ×0.81 (16 % within ±5 %); Eutrophication, terrestrial median ×0.93 (37 % within ±5 %); Land use median ×1.23 (6 % within ±5 %); Resource use, minerals and metals median ×1.04 (52 % within ±5 %); Water use median ×0.75 (11 % within ±5 %). BAFU's table is per its own unit (electricity per MJ, cars per m, crops per m2), converted here, and carries the organics and inorganics sub-indicators of freshwater ecotoxicity in each other's column (primary copper: 99.7 % of its ecotoxicity under 'organics'); they are compared like with like.
Also published by BAFU for this dataset: IPCC 2021 GWP100 0.2713 kg CO2 eq; Ecological Scarcity
2021 total 549.6 UBP.

Sensitivity check

One at a time on each direct exchange, over its declared 95 % range (±50 % when none is declared, the tdc-doc default for an assumption without a range). The supply chain behind each input is held at its mean.

Exchange Base Low / high Range Δ GWP100 (%) Δ other categories (max %)
Spruce wood, chipping and drying [CH] 1.62 kg ×0.721 / ×1.39 lognormal, GSD² 1.4 -20.9 / +29.0 38.7 (Land use)
Heat, natural gas, at industrial furnace 1MW [CH] 0.7868 MJ ×0.81 / ×1.23 lognormal, GSD² 1.24 -4.4 / +5.5 5.7 (Ecotoxicity, freshwater_inorganics)
Electricity, low voltage, at grid [CH] 0.04542 kWh ×0.721 / ×1.39 lognormal, GSD² 1.4 -0.5 / +0.6 19.9 (Ionising radiation, human health)
Mini CHP plant, common components for heat+electricity [CH] 2.988e-08 p ×0.5 / ×1.5 none declared: tdc-doc default ±50 % -0.0 / +0.0 0.1 (Human toxicity, cancer_inorganics)

Uncertainty analysis

Monte Carlo over the whole supply chain: 1000 draws (seed 42, computed 2026-11-17), every exchange of the database that carries a distribution resampled at each draw, one adjoint solve per category per draw. Exchanges without a distribution enter as fixed values (Section 4.3). Results in Section 5.

Comparison with other data

No other location of this dataset in the graph.

Conclusions and limitations

GWP100 0.2713 kg CO2 eq per kg (95 % interval 0.2031–0.3923). Dominant contributors: Spruce wood, chipping and drying 75 %; Heat, natural gas, at industrial furnace 1MW 23 %; Electricity, low voltage, at grid 2 %. Most sensitive: Spruce wood, chipping and drying [CH] (-20.9 / +29.0 %); Heat, natural gas, at industrial furnace 1MW [CH] (-4.4 / +5.5 %); Electricity, low voltage, at grid [CH] (-0.5 / +0.6 %). final control: 0 failed, 1 warning(s) (Section 7). The documentation relies on the publisher's metadata; this report is not a critical review in the sense of ISO 14044 clause 6.

Final control

Item Status Detail
reference flow PASS production amount 1.0 kg
closure: sum of direct contributions = dataset score (all 25 categories) PASS largest relative gap 2.0e-16
independent recalculation vs BAFU 2026 v1 published EF 3.1 results (LCIA Results.xlsx, June 2026) (climate change) PASS graph / published = 1; categories within ±5 %: 20/25
every technosphere input of the EcoSpold delivery is in the graph PASS all present (bafu_links_check.py)
uncertainty declared on the direct exchanges WARN 3/4 exchanges carry a distribution (75 %); the others enter the Monte Carlo as fixed values
Monte Carlo 95 % interval contains the deterministic score PASS 0.2713 in [0.2031, 0.3923]
time period declared PASS 2024/2024
geography is a known location code PASS CH
sources cited PASS 2 reference(s), of which 1 dataset source(s); 0 resolved to a bibliographic record (DOI or Crossref/OpenAlex match), the others kept as the publisher declares them

References

  1. Report — source; as declared by BAFU (not found in OpenAlex/Crossref)
  2. Life Cycle Inventory database of the Swiss Federal Administration, BAFU:2026 — database; dataset citation
  3. International Organization for Standardization (2006). ISO 14044:2006 Environmental management — Life cycle assessment — Requirements and guidelines (incl. Amd 1:2017, Amd 2:2020). Geneva.
  4. Frischknecht R. (2023). FOEN LCI data — Data quality requirements (DQR) v2.1. treeze Ltd. on behalf of the Swiss Federal Office for the Environment (FOEN/BAFU), Uster / Bern. (tdc-doc method reference; title, version and year to verify against the user's copy)
  5. European Commission, Joint Research Centre (2022). Environmental Footprint (EF) reference package 3.1. Ispra.
  6. Mutel C. (2017). Brightway: An open source framework for Life Cycle Assessment. Journal of Open Source Software 2(12), 236. https://doi.org/10.21105/joss.00236

Annex — licence and terms of use

BAFU:2026 Terms of Use - free use, processing and reuse of the data (including in LCA studies and calculators); the data may not be sold, resold or distributed as a database; modifications must be documented and shared under equivalent terms; credit required.


To suggest a correction or a dataset that does not exist yet, use Propose a dataset.