datasets:tdc:5c838461-ad82-5ce1-ae17-4b14915023ca
Differences
This shows you the differences between two versions of the page.
| datasets:tdc:5c838461-ad82-5ce1-ae17-4b14915023ca [2026/11/16 22:59] – created - external edit 127.0.0.1 | datasets:tdc:5c838461-ad82-5ce1-ae17-4b14915023ca [2026/11/20 02:00] (current) – removed - external edit (Unknown date) 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Life Cycle Inventory of Carbon fiber, PAN-based, wet spinning, UHM, sized — Europe (RER) ====== | ||
| - | |||
| - | // | ||
| - | |||
| - | ^ Item ^ Value ^ | ||
| - | | Dataset name (BAFU naming rules, DQR §4.7.1) | Carbon fiber, PAN-based, wet spinning, UHM (RER) | | ||
| - | | Dataset UUID / version | carbon-fiber-pan-based-wet-spinning-uhm-rer-4611b8 / draft (tdc) | | ||
| - | | Reference product, unit | Carbon fiber, PAN-based, wet spinning, UHM, sized, kg | | ||
| - | | Location (DQR location code) | RER — Europe | | ||
| - | | Reference year / time period | 2024-2026 / 2024-2026 | | ||
| - | | Technology level | current average technology (as described in the sources, Section 3) | | ||
| - | | Background database | BAFU 2026 v1 (Memgraph graph '' | ||
| - | | LCIA method | EF v3.1 (European Commission, Joint Research Centre 2022) (Brightway 2 / bw2calc (Mutel 2017)) | | ||
| - | | Status | ready for external review | | ||
| - | | Prepared by | tdc pipeline (datasetcreator agent), documentation and final check by tdc-doc | | ||
| - | |||
| - | ===== 1 Introduction ===== | ||
| - | |||
| - | Conversion of wet-spun PAN precursor fiber to ultra-high modulus (UHM) PAN-based carbon fiber: oxidation/ | ||
| - | |||
| - | This report documents the dataset according to ISO 14040 (//ISO 14040:2006 Environmental Management — Life Cycle Assessment — Principles and Framework (Incl. Amd 1:2020)// 2006) and ISO 14044 (//ISO 14044:2006 Environmental Management — Life Cycle Assessment — Requirements and Guidelines (Incl. Amd 1:2017, Amd 2:2020)// 2006) and to the BAFU LCI Data Quality Requirements v2.1 (Frischknecht 2023). It is written for the external critical reviewer (ISO 14044 clause 6, ISO/TS 14071 (//ISO/TS 14071:2014 Environmental Management — Life Cycle Assessment — Critical Review Processes and Reviewer Competencies// | ||
| - | |||
| - | ===== 2 Goal and scope definition (ISO 14044, 4.2) ===== | ||
| - | |||
| - | ==== 2.1 Goal of the study ==== | ||
| - | |||
| - | * Intended application: | ||
| - | * Reasons for carrying out the study: missing dataset in the background database | ||
| - | * Intended audience: LCA practitioners, | ||
| - | * Comparative assertions intended to be disclosed to the public: no | ||
| - | |||
| - | ==== 2.2 Functional unit and reference flow ==== | ||
| - | |||
| - | The functional unit is 1 kg of UHM PAN-based carbon fiber of product at the plant gate. Reference flow: **1 kg of UHM PAN-based carbon fiber** of Carbon fiber, PAN-based, wet spinning, UHM, sized at the plant gate. Product definition: main product: 1 kg sized UHM PAN-based carbon fiber (98.7% core fiber + 1.3% epoxy sizing) [see product exchange]. | ||
| - | |||
| - | ==== 2.3 Product system and system boundary ==== | ||
| - | |||
| - | Cradle-to-gate: | ||
| - | |||
| - | {{ : | ||
| - | |||
| - | //Product system and system boundary (unit processes, flows crossing the boundary).// | ||
| - | |||
| - | ^ Life cycle stage ^ Included ^ Notes / source ^ | ||
| - | | Fiber stabilization, | ||
| - | | Exhaust gas treatment 1 | yes | 35.99 kg per kg product | | ||
| - | | Exhaust gas treatment 2 (regenerative thermal oxidizer) | yes | 10.53 kg per kg product | | ||
| - | | Fiber drying and sizing | yes | 0.9928 kg per kg product | | ||
| - | | Graphitisation (UHM grade) | yes | 1 kg per kg product | | ||
| - | |||
| - | ==== 2.4 Cut-off criteria ==== | ||
| - | |||
| - | No intentional cut-off; missing items are listed as data gaps. Flows excluded by cut-off are listed with their estimated mass/energy share in Section 4.6. | ||
| - | |||
| - | ==== 2.5 Allocation procedures ==== | ||
| - | |||
| - | No co-product allocation (single reference product). | ||
| - | |||
| - | ==== 2.6 LCIA method and impact categories ==== | ||
| - | |||
| - | EF v3.1 (European Commission, Joint Research Centre 2022), all impact categories, characterisation only. Normalisation and weighting are not applied (optional elements, ISO 14044 4.4.3); no weighting is used for any comparison. | ||
| - | |||
| - | ==== 2.7 Data requirements and data quality requirements (ISO 14044 4.2.3.6) ==== | ||
| - | |||
| - | ^ Requirement ^ Target ^ Achieved (see Section 4.5) ^ | ||
| - | | Time-related coverage | 2020–2026 data | 2024-2026 | | ||
| - | | Geographical coverage | Europe | 2 geographical proxy dataset(s): Heat, natural gas, at heat plant: ‘Heat, natural gas, at heat plant’ used at ENTSO-E (no RER version; Wastewater treatment, class 3: ‘Treatment, | ||
| - | | Technology coverage | current industrial technology | Section 3 | | ||
| - | | Precision | lognormal uncertainty and pedigree on every flow (Frischknecht 2023) | lognormal on every exchange; Monte Carlo GWP100 95 % interval 56.6–69.5 | | ||
| - | | Completeness | all inventory classes (raw materials, catalyst, neutralisation, | ||
| - | | Representativeness | market-weighted route and feedstock | Section 3 (market and routes) | | ||
| - | | Consistency | one modelling approach for all regions/ | ||
| - | | Reproducibility | every value computed by a tool or cited | all amounts reproduced by tdc-doc | | ||
| - | | Sources of data | ≥ 3 peer-reviewed articles (Crossref-verified), | ||
| - | | Uncertainty of information | Monte Carlo on the pedigree distributions | Section 6.5 | | ||
| - | |||
| - | ==== 2.8 Assumptions and limitations ==== | ||
| - | |||
| - | * none recorded | ||
| - | |||
| - | ==== 2.9 Type of critical review ==== | ||
| - | |||
| - | External critical review by an independent expert (ISO/TS 14071) — pending. | ||
| - | |||
| - | ===== 3 Product, market and technology ===== | ||
| - | |||
| - | ==== 3.1 Product definition and grades ==== | ||
| - | |||
| - | main product: 1 kg sized UHM PAN-based carbon fiber (98.7% core fiber + 1.3% epoxy sizing) | ||
| - | |||
| - | ==== 3.2 Market, production volumes and production routes ==== | ||
| - | |||
| - | == 3.2.0.1 Production routes and shares == | ||
| - | |||
| - | PAN-based carbon fiber dominates the market (>90% of all high-performance CF). Pitch-based and rayon-based CFs together cover <10%. (Source: Prenzel2023 — “With a significant share (more than 90%) of today’s high-performance CFs being made from polyacrylonitrile (PAN)”) | ||
| - | |||
| - | The ultra-high-modulus (UHM) grade (>500 GPa) requires a graphitisation step at 2, | ||
| - | |||
| - | == 3.2.0.2 Raw materials and origins == | ||
| - | |||
| - | ^ Material ^ Global origin share (2023) ^ Source ^ | ||
| - | | PAN precursor fiber | Asia-Pacific ~63% | Prenzel2023: | ||
| - | | Acrylonitrile monomer | Asia ~70%, North America ~18%, Western Europe ~7% | Guo2026 / market data | | ||
| - | | Sizing (epoxy resin) | Asia-Pacific dominates | BCC Research / Huang2009 | | ||
| - | | Nitrogen (inert gas) | Produced on-site from air | JapanCFMA_LCI_2022: | ||
| - | |||
| - | == 3.2.0.3 Production volumes == | ||
| - | |||
| - | == 3.2.0.3.1 Carbon fiber (PAN-based, all grades) == | ||
| - | |||
| - | ^ Region / world ^ Volume ^ Year ^ Source ^ | ||
| - | | World (total CF consumption) | 34,200 t/yr | 2010 | Huang2009 Table 1 | | ||
| - | | Japan (PAN-based CF) | 17,288 t/yr | FY2017 | JapanCFMA_LCI_2022: | ||
| - | | World (estimated, 2024, all grades) | ~140,000 t/yr (≈ 140 kt) | 2024 | BCC Research 2024; Prenzel2023 Figure 3 | | ||
| - | |||
| - | == 3.2.0.3.2 PAN precursor fiber == | ||
| - | |||
| - | The precursor requirement for UHM grade (45% mass yield) is ≈ 2.2 kg per 1 kg CF. At ~140 kt/yr world CF production, total PAN precursor demand ≈ 310 kt/yr. | ||
| - | |||
| - | ^ Region ^ CF production share ^ Source ^ | ||
| - | | Asia-Pacific (dominated by China, Japan, Korea) | ~60–70% | Prenzel2023; | ||
| - | | North America | ~15–20% | Prenzel2023 Figure 3 | | ||
| - | | Europe (RER) | ~10–15% | Prenzel2023 Figure 3 | | ||
| - | |||
| - | == 3.2.0.4 Main producers by region == | ||
| - | |||
| - | * **RER (Europe)**: SGL Carbon (Germany), Toray Europe (Germany/ | ||
| - | * **RNA (North America)**: Hexcel (USA), Toray (USA), Cytec (USA) | ||
| - | * **RAS (Asia)**: Toray Industries (Japan), Teijin (Japan), Mitsubishi Chemical (Japan), Zhongfu Shenying (China), HS Hyosung (Korea) | ||
| - | |||
| - | == 3.2.0.5 UHM grade specifics == | ||
| - | |||
| - | UHM carbon fiber (>500 GPa) is a niche grade used mainly in aerospace, hydraulic cylinders, and pressure vessels. Production volumes are in the hundreds to low thousands of tonnes per year globally, far less than the HT/IM grades. The graphitisation step (2, | ||
| - | |||
| - | == 3.2.0.6 Alternative routes (sensitivity) == | ||
| - | |||
| - | The main alternative to the standard wet-spun UHM route is pitch-based UHM fiber (higher modulus but lower strength, different precursor). This dataset models the PAN-based UHM route, which is the most widely used for high-modulus aerospace applications. The pitch-based alternative is noted here but not modeled. | ||
| - | |||
| - | ^ Item ^ Value ^ Year ^ Source ^ | ||
| - | |||
| - | ==== 3.3 Process description ==== | ||
| - | |||
| - | Conversion of wet-spun PAN precursor fiber to ultra-high modulus (UHM) PAN-based carbon fiber: oxidation/ | ||
| - | |||
| - | ^ Step ^ Conditions (T, p, time) ^ Main inputs/ | ||
| - | | 1. Precursor fiber intake and line loading | Wet-spun PAN precursor fiber (from the precursor dataset of the region, 1 kg per 1/(yield) kg of carbon fiber) is fed to the stabilization line: fiber unwinding, inspection and tensioning onto the continuous line. | | [] | | ||
| - | | 2. Oxidation / stabilization | Continuous oven at about 250-300 C in air, tensioned: the PAN polymer cross-links and becomes infusible; non-carbon elements (H, N, O) are partly released to the off-gas. Off-gas from this stage goes to exhaust gas treatment. | | [] | | ||
| - | | 3. Low-temperature carbonization | Inert atmosphere (N2) furnace, about 350-500 C: nitrogen and residual oxygen are eliminated, the fiber skeleton becomes carbonaceous; | ||
| - | | 4. High-temperature carbonization | Inert (N2) furnaces, temperature ramped up to about 2000 C: decarburation, | ||
| - | | 5. Graphitisation | UHM-specific step: inert (Ar) furnaces at about 2500-3000 C with high tension: crystalline size grows, pseudo-graphitic structure -> ultra-high modulus; off-gas to exhaust gas treatment. | | [] | | ||
| - | | 6. Exhaust gas treatment | Thermal oxidiser (RTO/DFTO) of the combined off-gas (HCN, CO, NH3, H2O): destruction by combustion with support natural gas; residual flue gas (CO2, N2, H2O, minor NOx) to air. | | [] | | ||
| - | | 7. Surface treatment | Anodic etching in acidic electrolyte (e.g. nitric/ | ||
| - | | 8. Washing and drying | Fiber washed to remove residual electrolyte; | ||
| - | | 9. Sizing | Sizing agent (epoxy-compatible) applied as aqueous solution, a few wt% on the fiber; water evaporated. | | [] | | ||
| - | | 10. Winding and packaging | Sized fiber wound on creels/ | ||
| - | |||
| - | ===== 4 Life cycle inventory analysis (ISO 14044, 4.3) ===== | ||
| - | |||
| - | ==== 4.1 Data collection ==== | ||
| - | |||
| - | Two-step literature search: (1) the user’s embedded reference library (local vector search, — queries, 0 excerpts retained), then (2) a web and database round (scholarly indexes, patents, agency and industry documents) to complete the process description. Each reference was verified (DOI against Crossref; patents against the patent office record; other documents fetched and the quoted passage found in the text). Reference statistics: 16 references, 9 Crossref-verified articles, 3 patents, 4 grey documents. | ||
| - | |||
| - | ==== 4.2 Calculation procedures ==== | ||
| - | |||
| - | === 4.2.1 Stoichiometry and mass/ | ||
| - | |||
| - | Stoichiometric model of the dataset (spec.json), | ||
| - | |||
| - | ^ Balance ^ In (kg) ^ Out (kg) ^ Residual (%) ^ | ||
| - | | C | — | — | -0.761 | | ||
| - | | H | — | — | -0.799 | | ||
| - | | N | — | — | -0.034 | | ||
| - | | O | — | — | -0.722 | | ||
| - | | mass | — | — | -0.3 | | ||
| - | |||
| - | === 4.2.2 Energy model === | ||
| - | |||
| - | Heat and electricity are computed per consumer from process physics with the tdc energy model (Annex A); each parameter is cited or declared as an assumption. | ||
| - | |||
| - | ^ Consumer ^ Energy form ^ Duty / power ^ Time ^ Energy per kg ^ Source ^ | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Exhaust gas treatment 1] First off-gas treatment (quench/ | ||
| - | | [Exhaust gas treatment 2 (regenerative thermal oxidizer)] Regenerative thermal oxidizer NG fuel (on-site, 2.06 kg NG per kg product) | heat (fuel) | — | — | 5.908 MJ | [Sourced on-site RTO fuel (carrier fuel). Per user decision 4 carried by the energy model fuel_supply as BAFU heat per MJ. This plus the step] | | ||
| - | | [Exhaust gas treatment 2 (regenerative thermal oxidizer)] RTO fans and blower (off-gas and oxidising-air circulation) | electricity (utility) | — | — | 0.0262 kWh | [RTO fans and post-treatment blower of the regenerative thermal oxidizer; the sourced RSC_ESI_2016 abatement system (25 kW at 12.5 kg/h) incl] | | ||
| - | | [Fiber drying and sizing] Sizing-bath water heating (technical drying, recovered closed loop) | heat (electric) | — | — | 1.2 MJ | [The sizing-bath water is a recovered closed loop: ’the water evaporates in technical drying, is recovered and fed back; the coating remains ] | | ||
| - | | [Fiber drying and sizing] Drying air handling + winding drives (sourced RSC stage powers) | electricity | 1.2 | 1 | 1.2 kWh | [RSC_ESI_2016 Table 1 sourced stage powers (measured, 100 t/a pilot line) - independent of the Benitez2021 benchmark.] | | ||
| - | | [Graphitisation (UHM grade)] Graphitisation furnace electric power, UHM grade (graphite-block/ | ||
| - | |||
| - | Totals per kg: heat 68.77 MJ, electricity 63.53 kWh, primary energy — MJ. | ||
| - | |||
| - | === 4.2.3 Emissions === | ||
| - | |||
| - | Direct emissions: Water, off-gas vapor (to air) 1.424 kg; Nitrogen, off-gas (to air) 0.7378 kg; Nitrogen oxides, fossil (to air) 0.00012 kg; Hydrogen cyanide (to air) 0.00191 kg; Carbon monoxide, fossil (to air) 0.04726 kg; Ammonia (to air) 0.001357 kg; Methane (to air) 0.001444 kg; Ethylene (to air) 0.001366 kg; Ethane (to air) 0.001314 kg; Carbon dioxide, fossil (to air) 3.348 kg; Nitrogen, liquid, at plant (to air) 8.822 kg. | ||
| - | |||
| - | === 4.2.4 Transport === | ||
| - | |||
| - | Statistical transport from the provenance of each raw material to the plant region (Annex C): Transport, freight, lorry, 16t-32t gross weight, fleet average 0.00208 tkm | ||
| - | |||
| - | === 4.2.5 Infrastructure === | ||
| - | |||
| - | Chemical plant, organics 8e-10 p | ||
| - | |||
| - | ==== 4.3 Inventory table ==== | ||
| - | |||
| - | Per 1 kg of UHM PAN-based carbon fiber of product. GSD² = squared geometric standard deviation of the lognormal distribution; | ||
| - | |||
| - | ^ Exchange ^ Direction ^ Amount ^ Unit ^ BAFU dataset / elementary flow ^ GSD² ^ Pedigree ^ Source ^ | ||
| - | | Transport, freight, lorry, 16t-32t gross weight, fleet average | input | 0.00208 | tkm | Transport, freight, lorry, 16t-32t gross weight, fleet average [RER] | 3.05 | (4,2,2,2,1) | [—] | | ||
| - | | Chemical plant, organics | input | 8e-10 | p | Chemical plant, organics [RER] | 3.25 | (3,4,5,2,1) | [—] | | ||
| - | | Electricity, | ||
| - | | Sizing agent, epoxy | input | 0.016 | kg | Epoxy resin, liquid, at plant [RER] | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | | Oxygen, resource in air | input | 3.7003 | kg | Oxygen | 1.22 | (4,3,2,1,1) | [—] | | ||
| - | | Nitrogen, liquid, at plant | input | 8.822 | kg | Nitrogen, liquid, at plant [RER] | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | | Ammonium bicarbonate, | ||
| - | | Ethylene glycol, at plant | input | 0.0076 | kg | Ethylene glycol, at plant [RER] | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | | Water, off-gas vapor (to air) | output | 1.4239 | kg | Water | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Nitrogen, off-gas (to air) | output | 0.73784 | kg | Nitrogen | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Nitrogen oxides, fossil (to air) | output | 0.00012 | kg | Nitrogen oxides | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Hydrogen cyanide (to air) | output | 0.00191 | kg | Cyanide | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Carbon monoxide, fossil (to air) | output | 0.04726 | kg | Carbon monoxide, fossil | 5.06 | (4,3,2,1,1) | [—] | | ||
| - | | Ammonia (to air) | output | 0.001357 | kg | Ammonia | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Methane (to air) | output | 0.001444 | kg | Methane, fossil | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Ethylene (to air) | output | 0.001366 | kg | NMVOC, non-methane volatile organic compounds | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Ethane (to air) | output | 0.001314 | kg | Ethane | 2.05 | (4,3,2,1,1) | [—] | | ||
| - | | Carbon dioxide, fossil (to air) | output | 3.3479 | kg | Carbon dioxide, fossil | 1.22 | (4,3,2,1,1) | [—] | | ||
| - | | Heat, natural gas, at heat plant | input | 68.772 | MJ | Heat, natural gas, at heat plant [ENTSO-E] | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | | Nitrogen, liquid, at plant (to air) | output | 8.822 | kg | Nitrogen | 1.52 | (3,3,2,1,1) | [—] | | ||
| - | | Wastewater treatment, class 3 | input | 2.6e-05 | m3 | Treatment, sewage, to wastewater treatment, class 3 [CH] | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | | PAN precursor fiber, wet spun | input | 2.802 | kg | tdc dataset cf-v2-precursor-rer | 1.22 | (4,3,2,1,1) | [—] | | ||
| - | |||
| - | ==== 4.4 Data quality assessment ==== | ||
| - | |||
| - | Energy verification per sub-process (policy B): Fiber stabilization, | ||
| - | |||
| - | ==== 4.5 Data gaps and assumptions register ==== | ||
| - | |||
| - | ^ Item ^ Class ^ Value used ^ Reason / queries tried ^ Effect (Section 6.3) ^ | ||
| - | |||
| - | ==== 4.6 Validation of data (ISO 14044 4.3.3.2) ==== | ||
| - | |||
| - | * Mass and element balances: Section 4.2.1. | ||
| - | * Cross-check with independent data: BAFU datasets of similar processes (Carbon fiber production, fiber stabilization, | ||
| - | * Independent second-model review (Gemma-4-26B-A4B-it-GGUF): | ||
| - | * Citation test: every quoted excerpt was found in its source text (all found). | ||
| - | * Independent recalculation by tdc-doc: independent recalculation of GWP100 = pipeline LCIA (lcia.json): | ||
| - | |||
| - | ===== 5 Life cycle impact assessment (EF v3.1) ===== | ||
| - | |||
| - | Characterisation results per 1 kg of UHM PAN-based carbon fiber, computed with bw2calc on the BAFU 2026 v1 database (Mutel 2017; European Commission, Joint Research Centre 2022). | ||
| - | |||
| - | ^ Impact category ^ Indicator ^ Unit ^ Result ^ | ||
| - | | acidification | accumulated exceedance (AE) | mol H+-Eq | 0.2019 | | ||
| - | | climate change | global warming potential (GWP100) | kg CO2-Eq | 62.4 | | ||
| - | | climate change: biogenic | global warming potential (GWP100) | kg CO2-Eq | 0.3563 | | ||
| - | | climate change: fossil | global warming potential (GWP100) | kg CO2-Eq | 62.03 | | ||
| - | | climate change: land use and land use change | global warming potential (GWP100) | kg CO2-Eq | 0.01324 | | ||
| - | | ecotoxicity: | ||
| - | | ecotoxicity: | ||
| - | | ecotoxicity: | ||
| - | | energy resources: non-renewable | abiotic depletion potential (ADP): fossil fuels | MJ, net calorific value | 1189 | | ||
| - | | eutrophication: | ||
| - | | eutrophication: | ||
| - | | eutrophication: | ||
| - | | human toxicity: carcinogenic | comparative toxic unit for human (CTUh) | CTUh | 2.526e-08 | | ||
| - | | human toxicity: carcinogenic, | ||
| - | | human toxicity: carcinogenic, | ||
| - | | human toxicity: non-carcinogenic | comparative toxic unit for human (CTUh) | CTUh | 2.738e-07 | | ||
| - | | human toxicity: non-carcinogenic, | ||
| - | | human toxicity: non-carcinogenic, | ||
| - | | ionising radiation: human health | human exposure efficiency relative to u235 | kBq U235-Eq | 29.68 | | ||
| - | | land use | soil quality index | dimensionless | 172.9 | | ||
| - | | material resources: metals/ | ||
| - | | ozone depletion | ozone depletion potential (ODP) | kg CFC-11-Eq | 1.507e-06 | | ||
| - | | particulate matter formation | impact on human health | disease incidence | 1.56e-06 | | ||
| - | | photochemical oxidant formation: human health | tropospheric ozone concentration increase | kg NMVOC-Eq | 0.135 | | ||
| - | | water use | user deprivation potential (deprivation-weighted water consumption) | m3 world eq. deprived | 6.046 | | ||
| - | |||
| - | {{ : | ||
| - | |||
| - | // | ||
| - | |||
| - | Climate change 62.4 kg CO2-eq per kg. Main contributors: | ||
| - | |||
| - | ===== 6 Interpretation (ISO 14044, 4.5) ===== | ||
| - | |||
| - | ==== 6.1 Significant issues ==== | ||
| - | |||
| - | The inventory items that dominate climate change are PAN precursor fiber, wet spun 49 %; Electricity, | ||
| - | |||
| - | ==== 6.2 Completeness check ==== | ||
| - | |||
| - | board stage ‘inventory’ (closed + automatic check re-run): PASS; inventory completeness (classes, no zero amounts): PASS; every exchange scored in EF v3.1 (linked to BAFU / biosphere): PASS | ||
| - | |||
| - | ==== 6.3 Sensitivity check ==== | ||
| - | |||
| - | One-at-a-time variation of (a) every assumption of Section 4.6 over its plausible range and (b) every parameter for which the literature gives a range or several values (Annex D); scenarios for alternative routes, feedstocks and regions. | ||
| - | |||
| - | ^ Parameter ^ Base ^ Low / high ^ Source of the range ^ Δ GWP100 (%) ^ Δ other categories (max %) ^ | ||
| - | | Graphitisation (UHM grade): electricity_kWh (per kg step output) | 35.0 | 8.0 / 35.0 | [Li2024 (Applied Sciences 2024, 14(6):2528, inducti; YongXian2026 sourced specific power range 15-35 kW] | -13.8 / +0.0 | 30.7 | | ||
| - | | PAN precursor fiber, wet spun (pedigree 95 % interval) | 2.80201 | /1.22 / x1.22 | [pedigree (Annex H)] | -8.7 / +10.6 | 19.9 | | ||
| - | | Electricity, | ||
| - | | Exhaust gas treatment 2 (regenerative thermal oxidizer): heat_MJ (per kg step output) | 5.9082 | 6.93 / 6.951 | [Benitez2021 benchmark sub-process ’carbon fiber pr; harmonizing_lca_cf_notes: | ||
| - | | Heat, natural gas, at heat plant (pedigree 95 % interval) | 68.77205 | /1.13 / x1.13 | [pedigree (Annex H)] | -1.1 / +1.2 | 2.0 | | ||
| - | | Carbon dioxide, fossil (to air) (pedigree 95 % interval) | 3.34793 | /1.22 / x1.22 | [pedigree (Annex H)] | -1.0 / +1.2 | 1.2 | | ||
| - | | Fiber stabilization, | ||
| - | | Exhaust gas treatment 2 (regenerative thermal oxidizer): electricity_kWh (per kg step output) | 0.0262 | 0.0262 / 0.1885 | [Benitez A, Wulf C, de Palmenaer A, et al. Ecologic; RSC_ESI_2016 Table 1 ‘Abatement system 25 kW’ at 1] | +0.0 / +0.9 | 1.9 | | ||
| - | | Fiber drying and sizing: electricity_kWh (per kg step output) | 1.5922 | 0.6257 / 0.6257 | [Benitez A, Wulf C, de Palmenaer A, et al. Ecologic] | -0.5 / -0.5 | 1.1 | | ||
| - | | Nitrogen, liquid, at plant (pedigree 95 % interval) | 8.822 | /1.13 / x1.13 | [pedigree (Annex H)] | -0.4 / +0.4 | 1.2 | | ||
| - | | Fiber stabilization, | ||
| - | | Exhaust gas treatment 1: electricity_kWh (per kg step output) | 0.023 | 0.02 / 0.0229 | [Benitez A, Wulf C, de Palmenaer A, et al. Ecologic; Benitez2021 benchmark sub-process ‘carbon fiber pr; RSC_ESI_2016 Table 1 ’Abatement system 25 kW’ at 1] | -0.1 / -0.0 | 0.1 | | ||
| - | | Fiber drying and sizing: heat_MJ (per kg step output) | 0.0 | 0.3351 / 0.3351 | [Benitez A, Wulf C, de Palmenaer A, et al. Ecologic] | +0.0 / +0.0 | 0.1 | | ||
| - | | Sizing agent, epoxy (pedigree 95 % interval) | 0.016 | /1.13 / x1.13 | [pedigree (Annex H)] | -0.0 / +0.0 | 0.3 | | ||
| - | |||
| - | ==== 6.4 Consistency check ==== | ||
| - | |||
| - | Final control: 22 item(s) passed; no failure. | ||
| - | |||
| - | ==== 6.5 Uncertainty analysis ==== | ||
| - | |||
| - | Monte Carlo simulation (1000 runs) on the lognormal distributions of all exchanges: | ||
| - | |||
| - | ^ Impact category ^ Median ^ 2.5 % ^ 97.5 % ^ GSD² ^ | ||
| - | | acidification / accumulated exceedance (AE) | 0.2028 | 0.1818 | 0.2283 | 1.12 | | ||
| - | | climate change / global warming potential (GWP100) | 62.65 | 56.57 | 69.55 | 1.11 | | ||
| - | | climate change: biogenic / global warming potential (GWP100) | 0.3563 | 0.3252 | 0.3924 | 1.1 | | ||
| - | | climate change: fossil / global warming potential (GWP100) | 62.28 | 56.21 | 69.13 | 1.11 | | ||
| - | | climate change: land use and land use change / global warming potential (GWP100) | 0.01327 | 0.01209 | 0.01462 | 1.1 | | ||
| - | | ecotoxicity: | ||
| - | | ecotoxicity: | ||
| - | | ecotoxicity: | ||
| - | | energy resources: non-renewable / abiotic depletion potential (ADP): fossil fuels | 1193 | 1073 | 1336 | 1.12 | | ||
| - | | eutrophication: | ||
| - | | eutrophication: | ||
| - | | eutrophication: | ||
| - | | human toxicity: carcinogenic / comparative toxic unit for human (CTUh) | 2.532e-08 | 2.311e-08 | 2.803e-08 | 1.1 | | ||
| - | | human toxicity: carcinogenic, | ||
| - | | human toxicity: carcinogenic, | ||
| - | | human toxicity: non-carcinogenic / comparative toxic unit for human (CTUh) | 2.75e-07 | 2.493e-07 | 3.061e-07 | 1.11 | | ||
| - | | human toxicity: non-carcinogenic, | ||
| - | | human toxicity: non-carcinogenic, | ||
| - | | ionising radiation: human health / human exposure efficiency relative to u235 | 29.68 | 27.06 | 32.71 | 1.1 | | ||
| - | | land use / soil quality index | 173.2 | 158 | 190.7 | 1.1 | | ||
| - | | material resources: metals/ | ||
| - | | ozone depletion / ozone depletion potential (ODP) | 1.514e-06 | 1.369e-06 | 1.681e-06 | 1.11 | | ||
| - | | particulate matter formation / impact on human health | 1.567e-06 | 1.388e-06 | 1.776e-06 | 1.13 | | ||
| - | | photochemical oxidant formation: human health / tropospheric ozone concentration increase | 0.1366 | 0.1233 | 0.1524 | 1.11 | | ||
| - | | water use / user deprivation potential (deprivation-weighted water consumption) | 6.057 | 5.505 | 6.665 | 1.1 | | ||
| - | |||
| - | ==== 6.6 Comparison with other data ==== | ||
| - | |||
| - | ^ Source ^ Scope ^ Value (GWP100 or energy) ^ This dataset ^ Ratio ^ Explanation ^ | ||
| - | | [BAFU 2026 dataset] | Carbon fiber, weaved, at factory (RER), cradle-to-gate incl. weaving | 51.5 kg CO2-eq | 62.4 | 1.21 | BAFU analog (Benitez 2021 inventory); includes weaving | | ||
| - | | [tdc dataset] | cf-v2-uhm-ras (same product, other region) | 89.7 kg CO2-eq | 62.4 | 0.70 | regional variant (electricity, | ||
| - | | [tdc dataset] | cf-v2-uhm-rna (same product, other region) | 65.5 kg CO2-eq | 62.4 | 0.95 | regional variant (electricity, | ||
| - | | [Benitez et al. 2021] | electricity, | ||
| - | |||
| - | ==== 6.7 Conclusions, | ||
| - | |||
| - | GWP100 62.4 kg CO2-eq per kg (95 % interval 56.6–69.5). Dominant contributors: | ||
| - | |||
| - | ===== 7 Critical review ===== | ||
| - | |||
| - | //Reserved for the external reviewer (ISO 14044 clause 6; ISO/TS 14071 (//ISO/TS 14071:2014 Environmental Management — Life Cycle Assessment — Critical Review Processes and Reviewer Competencies// | ||
| - | |||
| - | ^ Reviewer comment ^ Response ^ Change in the dataset ^ | ||
| - | | | | | | ||
| - | |||
| - | ===== 8 References ===== | ||
| - | |||
| - | //Analysis of an Existing Method of Producing Carbon Fiber (Stabilization Furnace Energy Efficiency)// | ||
| - | |||
| - | Bell, Caleb. 2016a. //Fluids: Fluid Dynamics Component of Chemical Engineering Design Library (ChEDL)//. Released. [[https:// | ||
| - | |||
| - | Bell, Caleb. 2016b. //Thermo: Chemical Properties Component of Chemical Engineering Design Library (ChEDL)//. Released. [[https:// | ||
| - | |||
| - | Benitez A., Wulf C., de Palmenaer A., Lengersdorf M., Roding T., and Grube T. 2021. ‘Ecological Assessment of Fuel Cell Electric Vehicles with Special Focus on Type IV Carbon Fiber Hydrogen Tank’. In //Journal of Cleaner Production//, | ||
| - | |||
| - | CN102051711B. 2011. Process for producing polyacrylonitrile based carbon fibers. issued 2011. [[https:// | ||
| - | |||
| - | Commission Recommendation (EU) 2021/2279 of 15 December 2021 on the Use of the Environmental Footprint Methods to Measure and Communicate the Life Cycle Environmental Performance of Products and Organisations, | ||
| - | |||
| - | //Energy Consumption of a 100 t/a PAN Carbon Fibre Pilot Line (Per Stage, Measured), ESI of J. Mater. Chem. A//. n.d. [[https:// | ||
| - | |||
| - | European Commission, Joint Research Centre. 2022. // | ||
| - | |||
| - | Frischknecht, | ||
| - | |||
| - | //ISO 14040:2006 Environmental Management — Life Cycle Assessment — Principles and Framework (Incl. Amd 1:2020)//. 2006. International Organization for Standardization. | ||
| - | |||
| - | //ISO 14044:2006 Environmental Management — Life Cycle Assessment — Requirements and Guidelines (Incl. Amd 1:2017, Amd 2:2020)//. 2006. International Organization for Standardization. | ||
| - | |||
| - | //ISO/TS 14071:2014 Environmental Management — Life Cycle Assessment — Critical Review Processes and Reviewer Competencies// | ||
| - | |||
| - | Japan Carbon Fiber Manufacturers Association (JCMA). 2022. //LCI of the PAN-Based Carbon Fiber Manufacturing in Japan (2022)//. [[https:// | ||
| - | |||
| - | Li R., Zhang Y., Chu X., and Gan L. 2024. ‘Design and Numerical Study of Induction-Heating Graphitization Furnace Based on Graphene Coils’. In //Applied Sciences//, 14(6). [[https:// | ||
| - | |||
| - | Mutel, Chris. 2017. ‘Brightway: | ||
| - | |||
| - | Paul, Edward L., Victor A. Atiemo-Obeng, | ||
| - | |||
| - | Prenzel T.M., Hohmann A., Prescher T., et al. 2023. ‘Bringing Light into the Dark - Overview of Environmental Impacts of Carbon Fiber Production and Potential Levers for Reduction’. In // | ||
| - | |||
| - | US5266294A. 1993. Continuous, ultrahigh modulus carbon fiber. issued 1993. [[https:// | ||
| - | |||
| - | ===== Annex A — Energy consumption model ===== | ||
| - | |||
| - | The tdc energy model computes the heat and electricity demand per functional unit from process physics, in two layers, as process simulators do. | ||
| - | |||
| - | **Layer 1 — thermodynamic duties of each step.** Sensible heat //Q// = //m// // | ||
| - | |||
| - | **Layer 2 — conversion of duties into purchased energy.** Heat supply // | ||
| - | |||
| - | * agitation: //P// = // | ||
| - | * pumps: //P// = // | ||
| - | * vacuum: isothermal compression of the vapour/gas load //P// = // | ||
| - | * cooling: electricity per MJ of heat rejected; installed equipment at part load; plant utilities per tonne, each only with a source. | ||
| - | |||
| - | All expressions are unit-checked with //pint//. Result per kg: heat, electricity, | ||
| - | |||
| - | ^ Parameter ^ Value ^ Unit ^ Source / assumption ^ | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Exhaust gas treatment 1] First off-gas treatment (quench/ | ||
| - | | [Exhaust gas treatment 2 (regenerative thermal oxidizer)] Regenerative thermal oxidizer NG fuel (on-site, 2.06 kg NG per kg product) (duty) | {‘MJ’: 5.9082} | per kg of step output | Sourced on-site RTO fuel (carrier fuel). Per user decision 4 carried by the energy model fuel_supply as BAFU heat per MJ. This plus the step-1 stabilization NG (0.22 kg) = the on-site fuel combusted i | | ||
| - | | [Exhaust gas treatment 2 (regenerative thermal oxidizer)] RTO fans and blower (off-gas and oxidising-air circulation) (specific) | {‘quantity_per_batch’: | ||
| - | | [Fiber drying and sizing] Sizing-bath water heating (technical drying, recovered closed loop) (loss) | {‘MJ’: 1.2} | per kg of step output | The sizing-bath water is a recovered closed loop: ‘the water evaporates in technical drying, is recovered and fed back; the coating remains on the fiber’ (Prenzel2023 sec 3.1.3). 1.2 MJ per kg product | | ||
| - | | [Fiber drying and sizing] Drying air handling + winding drives (sourced RSC stage powers) (motor) | {‘P_kW’: | ||
| - | | [Graphitisation (UHM grade)] Graphitisation furnace electric power, UHM grade (graphite-block/ | ||
| - | |||
| - | ===== Annex B — Stoichiometry specification and balances ===== | ||
| - | |||
| - | < | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | " | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | } | ||
| - | ], | ||
| - | " | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | } | ||
| - | ] | ||
| - | } | ||
| - | </ | ||
| - | |||
| - | ===== Annex C — Transport calculation (raw-material provenance) ===== | ||
| - | |||
| - | Provenance of each raw material in the supply of the region: supply_transport (Eurostat Comext / UN Comtrade provenance shares, PEF legs). Legs: default scenario of the PEF method (Commission Recommendation (EU) 2021/2279 of 15 December 2021 on the Use of the Environmental Footprint Methods to Measure and Communicate the Life Cycle Environmental Performance of Products and Organisations 2021) (European suppliers 130 km truck, 240 km train, 270 km barge; overseas suppliers 1000 km truck plus the sea route from the origin’s main port, computed on the marine network). | ||
| - | |||
| - | ^ Raw material ^ HS code ^ Regional share ^ Overseas share ^ Main partners ^ Mean sea distance (km) ^ Source ^ | ||
| - | |||
| - | ===== Annex D — Source excerpts ===== | ||
| - | |||
| - | Every value taken from a source, with the verbatim passage it relies on (also attached as notes to the references in the Zotero library). | ||
| - | |||
| - | ^ Reference ^ Page / section ^ Excerpt ^ Used for ^ | ||
| - | | (Prenzel T.M. et al. 2023) | Sec 4.2 | “Various authors have provided quantification for this mass loss between 40 and 55 wt.% (c.f. Appendix A).” | Precursor-to-fiber mass loss; UHM uses the high end (55% loss -> yield 0.45) | | ||
| - | | (Prenzel T.M. et al. 2023) | Sec 4.3 | “a plausible average value for the total energy demand for the production of 12 k and 24 k HT-fibers was determined to be 170 MJ of thermal and electric per kg carbon fiber” | Total thermal+electric energy per kg CF for HT grade; UHM is higher due to graphitisation | | ||
| - | | (Prenzel T.M. et al. 2023) | Sec 4.4 | “waste air purification in the manufacturing process is indispensable. A common practice is treatment by proprietary regenerative thermal oxidizers, offering more than 95% efficiency [55]” | Off-gas treatment: regenerative thermal oxidiser destruction efficiency >95% | | ||
| - | | (Prenzel T.M. et al. 2023) | Sec 3.1.1 | “the precursor is cautiously exposed to temperatures around 200 to 300 °C under air in a continuous oxidizing furnace for one to two hours while being under constant tension” | Stabilization/ | ||
| - | | (Prenzel T.M. et al. 2023) | Sec 3.1.2 | “The first stage is performed at about 1000 °C in a low-temperature furnace… Subsequently, | ||
| - | | (Prenzel T.M. et al. 2023) | Sec 3.1.3 | “For sizing, the fiber is drawn through a sizing bath in which the sizing agent and water is absorbed. The water then evaporates during technical drying, is recovered, and fed back into the cycle, while the coating remains on the fiber” | Process water: the sizing-bath water is a recovered closed loop (no net water input for the UHM heat-treatment stage); supports the water DATA GAP | | ||
| - | | (Japan Carbon Fiber Manufacturers Association (JCMA) 2022) | Sec 5-3-6 | “All nitrogen was purchased externally. Unit data of the electricity and steam consumption for nitrogen was determined using the unit data based on the production performance of industrial gas manufacturers (background data).” | Transport: the BAFU CF analog datasets carry large lorry/rail transport for their purchased nitrogen and natural gas; our dataset’s only sourced purchased material is the sizing agent (precursor fiber is on-site; N2 and RTO fuel are documented DATA GAPS) | | ||
| - | | (US5266294A 1993) | Claims/ | ||
| - | | (Prenzel T.M. et al. 2023) | Sec 3.1.5 / 4 | “a plausible average value for the total energy demand for the production of 12 k and 24 k HT-fibers was determined to be 170 MJ of thermal and electric per kg carbon fiber” | Literature energy reference: 170 MJ/kg (thermal+electric, | ||
| - | | (//Energy Consumption of a 100 t/a PAN Carbon Fibre Pilot Line (Per Stage, Measured), ESI of J. Mater. Chem. A//, n.d.) | ESI Table 1 | “The energy consumption of our 100 tons per year pilot line displayed on Figure 1 was measured by the Carbon Nexus production facility” | Stage powers per kg product (12.5 kg/h, 30x24k spools, 120 m/h): 134 kW stabilisation, | ||
| - | | (//Analysis of an Existing Method of Producing Carbon Fiber (Stabilization Furnace Energy Efficiency)//, | ||
| - | | (Japan Carbon Fiber Manufacturers Association (JCMA) 2022) | sec 5-5 | “The total primary energy consumption of all raw materials and fuels (electricity, | ||
| - | | [YongXian2026] | Energy Cost in Carbon Fiber Production | “High modulus carbon fibre (380-450 GPa) requires an additional graphitization step at 2000-2800 C, which adds 15-35 kWh per kilogram to the energy budget” | Graphitisation furnace power (UHM-specific): | ||
| - | | (Benitez A. et al. 2021) | workbook lci-carbon-fiber.xlsx, | ||
| - | | (Li R. et al. 2024) | sec 1 | “Graphitization requires heating temperatures typically up to 2800 C or higher, which is an energy-intensive process requiring 3-8 MWh per ton of graphite product produced” | Independent graphitisation energy: 3-8 kWh per kg of graphitised product (induction-furnace family, same equipment as UHM fiber graphitisation, | ||
| - | | (CN102051711B 2011) | | “Said pre-oxidation process adopts electric furnace heating wire and far infrared assistant heating” | Carrier of the main heat-treatment step: the stabilization oven (electric heating wire + far infrared) and the carbonisation furnaces (low-T heat-resistant electric furnace heating wire below 1000 C; high-T electric resistance furnace) are all-electric in this UHM line; basis of the cited family-step difference vs the NG gas-assist of the lower grades | | ||
| - | | [benitez_2021_carbon_fiber_lci] | | “carbon fiber production, fiber winding and unwinding / carbon fiber, unwound / 2.73691” | Precursor anchor of the common stabilisation + carbonisation path: 2.73691 kg unwound PAN precursor per kg unwound CF (Benitez 2021 T700G, LCI workbook) - basis of the UHM precursor ratio 2.73691 x (0.99/0.96) = 2.82244 kg per kg sized UHM fiber | | ||
| - | | [benitez_2021_carbon_fiber_lci] | | “carbon fiber production, fiber stabilization, | ||
| - | | [groetsch_2021_gas_emission_carbon_fiber] | | “The carbon content continued to increase to 96% in the HT carbonization phase, where all other elements except for 3% N were removed.” | UHM precursor ratio: C mass fraction of the carbonised (pre-graphitisation) PAN fibre = 0.96, denominator of the graphitisation mass-loss factor 0.99/0.96 | | ||
| - | | [toray_m40j_data_sheet] | | “Chemical Composition: | ||
| - | | [harmonizing_lca_cf_notes] | | “Natural Gas: Stabilization 0.22 kg/kg CF (0.34 m3). Exhaust treatment 2 2.06 kg/kg CF (0.29 m3)” | On-site furnace/RTO fuel (user decision 4): 0.22 kg NG per kg CF stabilization gas assist + 2.06 kg NG per kg CF RTO fuel, grade-common shared equipment; carried as BAFU heat per MJ (fuel_supply ‘Heat, natural gas, at heat plant’), never a per-kg stoich input | | ||
| - | | (US5266294A 1993) | | “The non-reactive atmosphere may be nitrogen, argon or helium, however for temperatures above about 2000° C., argon and helium are preferred.” | Inert gas (user decision 3): graphitisation at >2000 C runs in argon (sourced atmosphere; UHM graphitises >2500 C). No sourced Ar make-up quantity in the sources after queries ‘ultra high modulus carbon fiber graphitization argon flow rate Nm3/kg’ and ‘carbon fiber graphitization argon make-up flow L/min furnace purge continuous’ -> Ar quantity = DATA GAP; the sourced N2 quantity (8.822 kg/kg, Benitez) carries the stoich inert-gas input | | ||
| - | |||
| - | ===== Annex E — Independent second-model review ===== | ||
| - | |||
| - | ^ # ^ Severity ^ Exchange ^ Finding ^ Answer / change ^ | ||
| - | | 1 | medium | Electricity, | ||
| - | | 2 | medium | Nitrogen, liquid, at plant | There is a documented DATA GAP regarding the Argon (Ar) make-up required for the graphitisation stage (>2500 C), as per US5266294A. The model currently uses the N2 quantity as a proxy. | The 8.822 kg/kg ‘Nitrogen, | ||
| - | | 3 | low | Water, off-gas vapor (to air) | Completeness: | ||
| - | |||
| - | ===== Annex F — Cross-check with independent data ===== | ||
| - | |||
| - | Independent analogs (BAFU): [‘Carbon fiber production, fiber stabilization, | ||
| - | |||
| - | ^ exchange / class ^ this dataset (per kg) ^ independent value(s) ^ source ^ status ^ | ||
| - | | electricity | 63.53 | 0.02291 - 28.23 | Carbon fiber production, fiber stabilization, | ||
| - | | transport | 0.00208 | 0.007105 - 1.26 | Carbon fiber production, fiber stabilization, | ||
| - | | water | 0 | 8.114e-05 - 0.0002505 | Carbon fiber production, fiber stabilization, | ||
| - | | Electricity, | ||
| - | | Wastewater treatment, class 3 | 2.6e-05 | 2.6e-05 m3 | Analyst-added waste-disposal input (not a stoich/ | ||
| - | | electricity vs energy.json | 63.53 | 63.53 kWh | tdc energy model | ok | | ||
| - | |||
| - | === 8.0.1 Justified deviations (with evidence) === | ||
| - | |||
| - | * off-gas: The toxic off-gas from stabilization/ | ||
| - | * transport: The BAFU CF analogs carry lorry/rail transport for their large purchased inputs (inert nitrogen 8 kg/kg, RTO natural gas 0.2 kg/kg, deionised water, epoxy). In this dataset the only purchased raw material is the epoxy sizing agent (0.016 kg/kg -> PEF 130 km lorry leg = 0.00208 tkm). The PAN precursor fiber is delivered on-site (no transport, per the shared-precursor rule) and the inert N2 / RTO fuel are documented DATA GAPS. The lower transport is a genuine, sourced difference (fewer purchased bulk materials), not a missing leg. [evidence: JapanCFMA_LCI_2022] | ||
| - | * water: The BAFU CF analogs include a small deionised-water input (electrolysis/ | ||
| - | * energy-divergence Fiber drying and sizing: The benchmark’s 0.335 MJ steam for drying/ | ||
| - | * energy-divergence Graphitisation (UHM grade): Li2024’s 3-8 MWh/tonne (3-8 kWh/kg) is for BULK graphite product (powder/ | ||
| - | * energy-divergence: | ||
| - | * energy-divergence Exhaust gas treatment 2 (regenerative thermal oxidizer): Electricity x0.139: the model RTO item is the RTO-only fan/blower (0.0262 kWh per kg treated off-gas, the Benitez2021 published value) whereas the independent RSC_ESI_2016 abatement measurement (0.1885 kWh per kg) covers the WHOLE abatement train (first treatment + RTO + post-treatment blower), so the RTO-only value is lower by design. Heat 5.9082 MJ per kg off-gas = BAFU-published RTO support NG (grade-common shared equipment 2.06 kg NG per kg CF x LHV 35.8 x 0.85), the same published basis as the verified SM/IM/HM grades. No physics is missing. [evidence: RSC_ESI_2016] | ||
| - | * energy-divergence Fiber stabilization, | ||
| - | * family-step Fiber stabilization, | ||
| - | * energy-literature-based: | ||
| - | |||
| - | Open flags: none | ||
| - | |||
| - | ===== Annex G — Files, tools and audit trail ===== | ||
| - | |||
| - | ^ Item ^ File / tool ^ Version / date ^ | ||
| - | | spec.json | / | ||
| - | | energy.json | / | ||
| - | | energy_result.json | / | ||
| - | | snippets.json | / | ||
| - | | board.json | / | ||
| - | | review.json | / | ||
| - | | lcia.json | / | ||
| - | | cf-v2-uhm-rer.ecospold | / | ||
| - | | tdc-doc | / | ||
| - | |||
| - | ===== Annex H — BAFU DQR v2.1 documentation fields (EcoSpold v1 metadata) ===== | ||
| - | |||
| - | ^ DQR field ^ Content ^ | ||
| - | | name | Carbon fiber, PAN-based, wet spinning, UHM (RER) | | ||
| - | | location | RER | | ||
| - | | unit | kg | | ||
| - | | time period | 2024-2026 | | ||
| - | | geography | Europe | | ||
| - | | technology | Conversion of wet-spun PAN precursor fiber to ultra-high modulus (UHM) PAN-based carbon fiber: oxidation/ | ||
| - | | included processes | Fiber stabilization, | ||
| - | | representativeness | Section 3 | | ||
| - | | sources | 16 references (Annex D, References) | | ||
| - | | data generator | tdc pipeline | | ||
| - | | validation | tdc-doc final control: ready for external review | | ||
| - | |||
| - | ---- | ||
| - | |||
| - | To comment on this report, select a passage and use the annotation panel on the right (registered users; comments are published once the BAFUquery team has reviewed them). To suggest a dataset that does not exist yet, use [[proposals: | ||
datasets/tdc/5c838461-ad82-5ce1-ae17-4b14915023ca.1794866394.txt.gz · Last modified: by 127.0.0.1
