datasets:tdc:c724fe59-4f68-5735-a13e-4edb0d44388d
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| datasets:tdc:c724fe59-4f68-5735-a13e-4edb0d44388d [2026/11/16 12:12] – created - external edit 127.0.0.1 | datasets:tdc:c724fe59-4f68-5735-a13e-4edb0d44388d [2026/11/20 01:27] (current) – removed - external edit (Unknown date) 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Life Cycle Inventory of Carbon fiber, PAN-based, wet spinning, intermediate modulus (IM), sized — Asia (RAS) ====== | ||
| - | |||
| - | // | ||
| - | |||
| - | ^ Item ^ Value ^ | ||
| - | | Dataset name (BAFU naming rules, DQR §4.7.1) | Carbon fiber, PAN-based, wet spinning, IM, RAS | | ||
| - | | Dataset UUID / version | carbon-fiber-pan-based-wet-spinning-im-ras-090169 / draft (tdc) | | ||
| - | | Reference product, unit | Carbon fiber, PAN-based, wet spinning, intermediate modulus (IM), sized, kg | | ||
| - | | Location (DQR location code) | RAS — Asia | | ||
| - | | Reference year / time period | 2020-2025, reference year 2024 / 2020-2025, reference year 2024 | | ||
| - | | Technology level | current average technology (as described in the sources, Section 3) | | ||
| - | | Background database | BAFU 2026 v1 (Memgraph graph '' | ||
| - | | LCIA method | EF v3.1 (European Commission, Joint Research Centre 2022) (Brightway 2 / bw2calc (Mutel 2017)) | | ||
| - | | Status | ready for external review | | ||
| - | | Prepared by | tdc pipeline (datasetcreator agent), documentation and final check by tdc-doc | | ||
| - | |||
| - | ===== 1 Introduction ===== | ||
| - | |||
| - | Conversion of 1 kg of wet-spun PAN precursor fiber into 1 kg of sized, intermediate modulus (IM) carbon fiber: stabilization (oxidation in air), low- and high-temperature carbonisation, | ||
| - | |||
| - | This report documents the dataset according to ISO 14040 (//ISO 14040:2006 Environmental Management — Life Cycle Assessment — Principles and Framework (Incl. Amd 1:2020)// 2006) and ISO 14044 (//ISO 14044:2006 Environmental Management — Life Cycle Assessment — Requirements and Guidelines (Incl. Amd 1:2017, Amd 2:2020)// 2006) and to the BAFU LCI Data Quality Requirements v2.1 (Frischknecht 2023). It is written for the external critical reviewer (ISO 14044 clause 6, ISO/TS 14071 (//ISO/TS 14071:2014 Environmental Management — Life Cycle Assessment — Critical Review Processes and Reviewer Competencies// | ||
| - | |||
| - | ===== 2 Goal and scope definition (ISO 14044, 4.2) ===== | ||
| - | |||
| - | ==== 2.1 Goal of the study ==== | ||
| - | |||
| - | * Intended application: | ||
| - | * Reasons for carrying out the study: missing dataset in the background database | ||
| - | * Intended audience: LCA practitioners, | ||
| - | * Comparative assertions intended to be disclosed to the public: no | ||
| - | |||
| - | ==== 2.2 Functional unit and reference flow ==== | ||
| - | |||
| - | The functional unit is 1 kg of sized, intermediate modulus (IM) carbon fiber, PAN-based, wet spun of product at the plant gate. Reference flow: **1 kg of sized, intermediate modulus (IM) carbon fiber, PAN-based, wet spun** of Carbon fiber, PAN-based, wet spinning, intermediate modulus (IM), sized at the plant gate. Product definition: Carbon fiber, PAN-based, wet spinning, intermediate modulus (IM), sized [see product exchange]. | ||
| - | |||
| - | ==== 2.3 Product system and system boundary ==== | ||
| - | |||
| - | Cradle-to-gate: | ||
| - | |||
| - | {{ : | ||
| - | |||
| - | //Product system and system boundary (unit processes, flows crossing the boundary).// | ||
| - | |||
| - | ^ Life cycle stage ^ Included ^ Notes / source ^ | ||
| - | | Fiber stabilization, | ||
| - | | Exhaust gas treatment 1 | yes | 36.25 kg per kg product | | ||
| - | | Exhaust gas treatment 2 (regenerative thermal oxidizer) | yes | 10.61 kg per kg product | | ||
| - | | Fiber drying and sizing | yes | 1 kg per kg product | | ||
| - | |||
| - | ==== 2.4 Cut-off criteria ==== | ||
| - | |||
| - | No intentional cut-off; missing items are listed as data gaps. Flows excluded by cut-off are listed with their estimated mass/energy share in Section 4.6. | ||
| - | |||
| - | ==== 2.5 Allocation procedures ==== | ||
| - | |||
| - | No co-product allocation (single reference product). | ||
| - | |||
| - | ==== 2.6 LCIA method and impact categories ==== | ||
| - | |||
| - | EF v3.1 (European Commission, Joint Research Centre 2022), all impact categories, characterisation only. Normalisation and weighting are not applied (optional elements, ISO 14044 4.4.3); no weighting is used for any comparison. | ||
| - | |||
| - | ==== 2.7 Data requirements and data quality requirements (ISO 14044 4.2.3.6) ==== | ||
| - | |||
| - | ^ Requirement ^ Target ^ Achieved (see Section 4.5) ^ | ||
| - | | Time-related coverage | 2020–2026 data | 2020-2025, reference year 2024 | | ||
| - | | Geographical coverage | Asia | 13 geographical proxy dataset(s): Chemical plant, organics: ‘Chemical plant, organics’ used at RER (no RAS version) — geographical pro; Tap water, at user: ‘Tap water, at user’ used at RER (no RAS version) — geographical proxy; Wastewater treatment, sewage, class 5: ‘Treatment, | ||
| - | | Technology coverage | current industrial technology | Section 3 | | ||
| - | | Precision | lognormal uncertainty and pedigree on every flow (Frischknecht 2023) | lognormal on every exchange; Monte Carlo GWP100 95 % interval 59.8–69.4 | | ||
| - | | Completeness | all inventory classes (raw materials, catalyst, neutralisation, | ||
| - | | Representativeness | market-weighted route and feedstock | Section 3 (market and routes) | | ||
| - | | Consistency | one modelling approach for all regions/ | ||
| - | | Reproducibility | every value computed by a tool or cited | all amounts reproduced by tdc-doc | | ||
| - | | Sources of data | ≥ 3 peer-reviewed articles (Crossref-verified), | ||
| - | | Uncertainty of information | Monte Carlo on the pedigree distributions | Section 6.5 | | ||
| - | |||
| - | ==== 2.8 Assumptions and limitations ==== | ||
| - | |||
| - | * none recorded | ||
| - | |||
| - | ==== 2.9 Type of critical review ==== | ||
| - | |||
| - | External critical review by an independent expert (ISO/TS 14071) — pending. | ||
| - | |||
| - | ===== 3 Product, market and technology ===== | ||
| - | |||
| - | ==== 3.1 Product definition and grades ==== | ||
| - | |||
| - | See the product exchange. | ||
| - | |||
| - | ==== 3.2 Market, production volumes and production routes ==== | ||
| - | |||
| - | Product: PAN-based, wet-spun, intermediate-modulus (IM) carbon fiber, sized. Functional unit: 1 kg of sized IM carbon fiber. Scope starts at the regional PAN precursor fiber (cf-v2-precursor-RER); | ||
| - | |||
| - | == 3.2.0.1 1. Production routes in commercial use and their shares == | ||
| - | |||
| - | The commercial route for the largest share of PAN carbon fiber is: acrylonitrile -> (polymerization -> dope -> wet spinning -> coagulation -> washing -> stretching -> drying -> solvent recovery) -> PAN precursor fiber -> oxidative stabilization (air, 200-300 C) -> carbonization (inert, up to the grade temperature) -> surface treatment -> sizing -> finished fiber. [patent US5804108A] | ||
| - | |||
| - | Wet spinning of PAN is the dominant precursor route for IM/standard grades. Alternative routes (dry-jet wet spinning for high-modulus/ | ||
| - | |||
| - | Most widely used route for this grade = PAN wet-spun precursor + air stabilization + two-stage carbonization + electrochemical surface treatment + epoxy sizing. | ||
| - | |||
| - | == 3.2.0.2 2. Raw materials and origins (market shares by region) == | ||
| - | |||
| - | * PAN precursor fiber: the dominant raw material for IM carbon fiber (PAN accounts for the large majority of CF production; pitch/ | ||
| - | * Acrylonitrile (AN): the monomer. China is the world’s largest AN producer (~50% of global capacity, 5.189 Mt/yr end-2025) [Baidu Baike 2025]. Global AN capacity was 7.2 Mt in 2018 with production 5.7 Mt [HDIN 2018]. Regional AN capacity (2018): China 2.1 Mt, APAC ex-China 2.1 Mt, Europe 1.9 Mt, North America 0.9 Mt, MEA 0.2 Mt [HDIN 2018]. | ||
| - | * Sizing agent: epoxy resin (or polyurethane), | ||
| - | * Utilities: N2 (carbonization atmosphere), | ||
| - | |||
| - | == 3.2.0.3 3. Production volumes (tonnes/ | ||
| - | |||
| - | == 3.2.0.3.1 Carbon fiber (product) == | ||
| - | |||
| - | * World demand 2025: ~148,500 t (CAGR 2010-2025 +10.55%; +17.39% YoY) [CU 2025]. | ||
| - | * World operational capacity 2025: 326,080 t (309,000 t in 2024, +5.5% YoY) [ATA 2025]. | ||
| - | * China operational capacity 2025: 171,080 t = 52.5% of global capacity (48.6% in 2024) [ATA 2025]. | ||
| - | * Main producing regions: Asia (China >50%, plus Japan/ | ||
| - | |||
| - | == 3.2.0.3.2 PAN precursor / acrylonitrile (main raw material) == | ||
| - | |||
| - | * Acrylonitrile world capacity ~7.2 Mt (2018) -> ~10 Mt projected (2024) [HDIN 2018]. | ||
| - | * China AN capacity 5.189 Mt/yr (end-2025) = ~50% of global [Baidu Baike 2025]. | ||
| - | * Europe AN capacity ~1.9 Mt (2018) [HDIN 2018] — basis for the RER precursor provenance. | ||
| - | * PAN precursor fiber: produced by the major CF producers (Toray, Teijin, Syensqo, Jilin, Zhongfu, Hyosung) either integrated with the CF line or sold separately. For RER the precursor is assumed produced in-region from European acrylonitrile. | ||
| - | |||
| - | == 3.2.0.4 4. Default route and feedstock choice == | ||
| - | |||
| - | Default route for all three regions = the largest-volume commercial route: PAN wet-spun precursor + air stabilization + two-stage inert carbonization + electrochemical surface treatment + epoxy sizing. Feedstock = wet-spun PAN precursor fiber of the region. Alternative route (dry-jet wet spinning for the precursor) is noted but not modeled (it is the route for higher-modulus/ | ||
| - | |||
| - | Sources: [1] Composites United e.V., “Market Report 2025 - The Global Market for Carbon Fibers and Carbon Composites”, | ||
| - | |||
| - | ^ Item ^ Value ^ Year ^ Source ^ | ||
| - | |||
| - | ==== 3.3 Process description ==== | ||
| - | |||
| - | Conversion of 1 kg of wet-spun PAN precursor fiber into 1 kg of sized, intermediate modulus (IM) carbon fiber: stabilization (oxidation in air), low- and high-temperature carbonisation, | ||
| - | |||
| - | ^ Step ^ Conditions (T, p, time) ^ Main inputs/ | ||
| - | | Low-temperature carbonization (inert atmosphere, up to 1000 C) | Stabilized fiber heated in N2 to ~1000 C; carbon rings form, H/N/O removed as off-gas; ~50% mass loss. | | [] | | ||
| - | | Oxidative stabilization (air, 200-300 C) | The wet-spun PAN precursor fiber is heated to 200-300 C in air (recirculating oxidizer oven) for 1-2 h under tension, cross-linking the PAN to a stable ladder structure; ~10% mass loss. | | [] | | ||
| - | | High-temperature carbonization (inert atmosphere, up to 1800 C) | Fiber heated in N2 to 1500-1800 C in a graphite furnace; graphitic crystallites grow; ~21% mass loss. IM grade stops here (no graphitisation). | | [] | | ||
| - | | Sizing and final winding | The dry fiber is coated with an epoxy sizing agent and wound onto spools. | | [] | | ||
| - | | Surface treatment (electrochemical oxidation) | The fiber is etched in an acidic (HNO3) electrolysis bath, the conductive fiber as anode, improving sizing adhesion. | | [] | | ||
| - | | Washing and drying | The etched fiber is washed and the sizing-bath water is removed in technical drying (closed-loop recovered water). | | [] | | ||
| - | |||
| - | ===== 4 Life cycle inventory analysis (ISO 14044, 4.3) ===== | ||
| - | |||
| - | ==== 4.1 Data collection ==== | ||
| - | |||
| - | Two-step literature search: (1) the user’s embedded reference library (local vector search, — queries, 0 excerpts retained), then (2) a web and database round (scholarly indexes, patents, agency and industry documents) to complete the process description. Each reference was verified (DOI against Crossref; patents against the patent office record; other documents fetched and the quoted passage found in the text). Reference statistics: 15 references, 6 Crossref-verified articles, 1 patents, 8 grey documents. | ||
| - | |||
| - | ==== 4.2 Calculation procedures ==== | ||
| - | |||
| - | === 4.2.1 Stoichiometry and mass/ | ||
| - | |||
| - | Stoichiometric model of the dataset (spec.json), | ||
| - | |||
| - | ^ Balance ^ In (kg) ^ Out (kg) ^ Residual (%) ^ | ||
| - | | C | — | — | -0 | | ||
| - | | H | — | — | -0.001 | | ||
| - | | N | — | — | 0 | | ||
| - | | O | — | — | 0 | | ||
| - | | mass | — | — | 0 | | ||
| - | |||
| - | === 4.2.2 Energy model === | ||
| - | |||
| - | Heat and electricity are computed per consumer from process physics with the tdc energy model (Annex A); each parameter is cited or declared as an assumption. | ||
| - | |||
| - | ^ Consumer ^ Energy form ^ Duty / power ^ Time ^ Energy per kg ^ Source ^ | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Exhaust gas treatment 1] First off-gas treatment (quench/ | ||
| - | | [Exhaust gas treatment 2 (regenerative thermal oxidizer)] Regenerative thermal oxidizer NG fuel (on-site, 2.06 kg NG per kg product) | heat (fuel) | — | — | 5.908 MJ | [Sourced on-site RTO fuel (carrier fuel). This plus the step-1 stabilization NG (0.22 kg) = the spec.json stoich NG reactant 2.28 kg per kg p] | | ||
| - | | [Exhaust gas treatment 2 (regenerative thermal oxidizer)] RTO fans and blower (off-gas and oxidising-air circulation) | electricity (utility) | — | — | 0.0262 kWh | [RTO fans and post-treatment blower of the regenerative thermal oxidizer; the sourced RSC_ESI_2016 abatement system (25 kW at 12.5 kg/h) incl] | | ||
| - | | [Fiber drying and sizing] Sizing-bath water heating (technical drying, recovered closed loop) | heat (electric) | — | — | 1.2 MJ | [The sizing-bath water is a recovered closed loop: ’the water evaporates in technical drying, is recovered and fed back; the coating remains ] | | ||
| - | | [Fiber drying and sizing] Drying air handling + winding drives (sourced RSC stage powers) | electricity | 1.2 | 1 | 1.2 kWh | [RSC_ESI_2016 Table 1 sourced stage powers (measured, 100 t/a pilot line) - independent of the Benitez2021 benchmark.] | | ||
| - | |||
| - | Totals per kg: heat 69.38 MJ, electricity 28.8 kWh, primary energy — MJ. | ||
| - | |||
| - | === 4.2.3 Emissions === | ||
| - | |||
| - | Direct emissions: Carbon dioxide, fossil (to air) 3.319 kg; Water, off-gas vapor (to air) 1.253 kg; Nitrogen, off-gas (to air) 9.528 kg; Nitrogen oxides, fossil (to air) 0.00012 kg; Hydrogen cyanide (to air) 0.00191 kg; Carbon monoxide, fossil (to air) 0.009236 kg; Ammonia (to air) 0.001357 kg; Methane (to air) 0.001444 kg; Ethylene (to air) 0.001366 kg; Ethane (to air) 0.001314 kg. | ||
| - | |||
| - | === 4.2.4 Transport === | ||
| - | |||
| - | Statistical transport from the provenance of each raw material to the plant region (Annex C): Transport, freight, lorry, diesel, 40t gross weight, 2006, EURO-IV, long haul 1.263 tkm; Transport, freight, rail 2.095 tkm; Transport, barge 2.356 tkm; Transport, transoceanic freight ship 2.311 tkm | ||
| - | |||
| - | === 4.2.5 Infrastructure === | ||
| - | |||
| - | Chemical plant, organics 8e-10 p | ||
| - | |||
| - | ==== 4.3 Inventory table ==== | ||
| - | |||
| - | Per 1 kg of sized, intermediate modulus (IM) carbon fiber, PAN-based, wet spun of product. GSD² = squared geometric standard deviation of the lognormal distribution; | ||
| - | |||
| - | ^ Exchange ^ Direction ^ Amount ^ Unit ^ BAFU dataset / elementary flow ^ GSD² ^ Pedigree ^ Source ^ | ||
| - | | Electricity, | ||
| - | | Chemical plant, organics | input | 8e-10 | p | Chemical plant, organics [RER] | 3.06 | (4,3,3,1,1) | [—] | | ||
| - | | Tap water, at user | input | 0.61 | kg | Tap water, at user [RER] | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | | Wastewater treatment, sewage, class 5 | input | 0.00061 | m3 | Treatment, sewage, to wastewater treatment, class 5 [CH] | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | | Water, deionised, at plant | input | 8.114e-05 | kg | Water, deionised, at plant [CH] | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | | Transport, freight, lorry, diesel, 40t gross weight, 2006, EURO-IV, long haul | input | 1.2634 | tkm | Transport, freight, lorry, diesel, 40t gross weight, 2006, EURO-IV, long haul [RER] | 3.02 | (3,3,2,2,1) | [—] | | ||
| - | | Transport, freight, rail | input | 2.0946 | tkm | Transport, freight, rail [RER] | 2.02 | (3,3,2,2,1) | [—] | | ||
| - | | Transport, barge | input | 2.3564 | tkm | Transport, barge [RER] | 2.02 | (3,3,2,2,1) | [—] | | ||
| - | | Transport, transoceanic freight ship | input | 2.3113 | tkm | Transport, transoceanic freight ship [OCE] | 2.02 | (3,3,2,2,1) | [—] | | ||
| - | | Sizing agent, epoxy | input | 0.016 | kg | Epoxy resin, liquid, at plant [RER] | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | | Oxygen, resource in air | input | 3.5406 | kg | Oxygen | 1.22 | (4,3,2,1,1) | [—] | | ||
| - | | Nitrogen, liquid, at plant | input | 8.822 | kg | Nitrogen, liquid, at plant [RER] | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | | Ammonium bicarbonate, | ||
| - | | Ethylene glycol, at plant | input | 0.0076 | kg | Ethylene glycol, at plant [RER] | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | | Carbon dioxide, fossil (to air) | output | 3.3185 | kg | Carbon dioxide, fossil | 1.22 | (4,3,2,1,1) | [—] | | ||
| - | | Water, off-gas vapor (to air) | output | 1.2528 | kg | Water | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Nitrogen, off-gas (to air) | output | 9.5277 | kg | Nitrogen | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Nitrogen oxides, fossil (to air) | output | 0.00012 | kg | Nitrogen oxides | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Hydrogen cyanide (to air) | output | 0.00191 | kg | Cyanide | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Carbon monoxide, fossil (to air) | output | 0.009236 | kg | Carbon monoxide, fossil | 5.06 | (4,3,2,1,1) | [—] | | ||
| - | | Ammonia (to air) | output | 0.001357 | kg | Ammonia | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Methane (to air) | output | 0.001444 | kg | Methane, fossil | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Ethylene (to air) | output | 0.001366 | kg | NMVOC, non-methane volatile organic compounds | 1.57 | (4,3,2,1,1) | [—] | | ||
| - | | Ethane (to air) | output | 0.001314 | kg | Ethane | 2.05 | (4,3,2,1,1) | [—] | | ||
| - | | Heat, natural gas, at heat plant | input | 69.381 | MJ | Heat, natural gas, at heat plant [JP] | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | | PAN precursor fiber, wet spun | input | 2.737 | kg | tdc dataset cf-v2-precursor-ras | 1.13 | (3,3,2,1,1) | [—] | | ||
| - | |||
| - | ==== 4.4 Data quality assessment ==== | ||
| - | |||
| - | Energy verification per sub-process (policy B): Fiber stabilization, | ||
| - | |||
| - | ==== 4.5 Data gaps and assumptions register ==== | ||
| - | |||
| - | ^ Item ^ Class ^ Value used ^ Reason / queries tried ^ Effect (Section 6.3) ^ | ||
| - | |||
| - | ==== 4.6 Validation of data (ISO 14044 4.3.3.2) ==== | ||
| - | |||
| - | * Mass and element balances: Section 4.2.1. | ||
| - | * Cross-check with independent data: BAFU datasets of similar processes (Carbon fiber production, fiber stabilization, | ||
| - | * Independent second-model review (Gemma-4-26B-A4B-it-GGUF): | ||
| - | * Citation test: every quoted excerpt was found in its source text (all found). | ||
| - | * Independent recalculation by tdc-doc: independent recalculation of GWP100 = pipeline LCIA (lcia.json): | ||
| - | |||
| - | ===== 5 Life cycle impact assessment (EF v3.1) ===== | ||
| - | |||
| - | Characterisation results per 1 kg of sized, intermediate modulus (IM) carbon fiber, PAN-based, wet spun, computed with bw2calc on the BAFU 2026 v1 database (Mutel 2017; European Commission, Joint Research Centre 2022). | ||
| - | |||
| - | ^ Impact category ^ Indicator ^ Unit ^ Result ^ | ||
| - | | acidification | accumulated exceedance (AE) | mol H+-Eq | 0.178 | | ||
| - | | climate change | global warming potential (GWP100) | kg CO2-Eq | 64.1 | | ||
| - | | climate change: biogenic | global warming potential (GWP100) | kg CO2-Eq | 0.1821 | | ||
| - | | climate change: fossil | global warming potential (GWP100) | kg CO2-Eq | 63.91 | | ||
| - | | climate change: land use and land use change | global warming potential (GWP100) | kg CO2-Eq | 0.009981 | | ||
| - | | ecotoxicity: | ||
| - | | ecotoxicity: | ||
| - | | ecotoxicity: | ||
| - | | energy resources: non-renewable | abiotic depletion potential (ADP): fossil fuels | MJ, net calorific value | 984 | | ||
| - | | eutrophication: | ||
| - | | eutrophication: | ||
| - | | eutrophication: | ||
| - | | human toxicity: carcinogenic | comparative toxic unit for human (CTUh) | CTUh | 2.27e-08 | | ||
| - | | human toxicity: carcinogenic, | ||
| - | | human toxicity: carcinogenic, | ||
| - | | human toxicity: non-carcinogenic | comparative toxic unit for human (CTUh) | CTUh | 5.006e-07 | | ||
| - | | human toxicity: non-carcinogenic, | ||
| - | | human toxicity: non-carcinogenic, | ||
| - | | ionising radiation: human health | human exposure efficiency relative to u235 | kBq U235-Eq | 9.799 | | ||
| - | | land use | soil quality index | dimensionless | 151.1 | | ||
| - | | material resources: metals/ | ||
| - | | ozone depletion | ozone depletion potential (ODP) | kg CFC-11-Eq | 1.077e-06 | | ||
| - | | particulate matter formation | impact on human health | disease incidence | 1.491e-06 | | ||
| - | | photochemical oxidant formation: human health | tropospheric ozone concentration increase | kg NMVOC-Eq | 0.1203 | | ||
| - | | water use | user deprivation potential (deprivation-weighted water consumption) | m3 world eq. deprived | 5.493 | | ||
| - | |||
| - | {{ : | ||
| - | |||
| - | // | ||
| - | |||
| - | Climate change 64.1 kg CO2-eq per kg. Main contributors: | ||
| - | |||
| - | ===== 6 Interpretation (ISO 14044, 4.5) ===== | ||
| - | |||
| - | ==== 6.1 Significant issues ==== | ||
| - | |||
| - | The inventory items that dominate climate change are PAN precursor fiber, wet spun 49 %; Electricity, | ||
| - | |||
| - | ==== 6.2 Completeness check ==== | ||
| - | |||
| - | board stage ‘inventory’ (closed + automatic check re-run): PASS; inventory completeness (classes, no zero amounts): PASS; every exchange scored in EF v3.1 (linked to BAFU / biosphere): PASS | ||
| - | |||
| - | ==== 6.3 Sensitivity check ==== | ||
| - | |||
| - | One-at-a-time variation of (a) every assumption of Section 4.6 over its plausible range and (b) every parameter for which the literature gives a range or several values (Annex D); scenarios for alternative routes, feedstocks and regions. | ||
| - | |||
| - | ^ Parameter ^ Base ^ Low / high ^ Source of the range ^ Δ GWP100 (%) ^ Δ other categories (max %) ^ | ||
| - | | PAN precursor fiber, wet spun (pedigree 95 % interval) | 2.73704 | /1.13 / x1.13 | [pedigree (Annex H)] | -5.6 / +6.3 | 11.7 | | ||
| - | | Fiber stabilization, | ||
| - | | Electricity, | ||
| - | | Exhaust gas treatment 2 (regenerative thermal oxidizer): electricity_kWh (per kg step output) | 0.0262 | 0.0262 / 0.1885 | [Benitez A, Wulf C, de Palmenaer A, et al. Ecologic; RSC_ESI_2016 Table 1 ‘Abatement system 25 kW’ at 1] | +0.0 / +1.9 | 3.9 | | ||
| - | | Exhaust gas treatment 2 (regenerative thermal oxidizer): heat_MJ (per kg step output) | 5.9082 | 6.93 / 6.951 | [Benitez2021 benchmark sub-process ’carbon fiber pr; harmonizing_lca_cf_notes: | ||
| - | | Heat, natural gas, at heat plant (pedigree 95 % interval) | 69.38065 | /1.13 / x1.13 | [pedigree (Annex H)] | -1.1 / +1.2 | 2.7 | | ||
| - | | Carbon dioxide, fossil (to air) (pedigree 95 % interval) | 3.31853 | /1.22 / x1.22 | [pedigree (Annex H)] | -0.9 / +1.1 | 1.1 | | ||
| - | | Fiber drying and sizing: electricity_kWh (per kg step output) | 1.5922 | 0.6257 / 0.6257 | [Benitez A, Wulf C, de Palmenaer A, et al. Ecologic] | -1.1 / -1.1 | 2.2 | | ||
| - | | Transport, freight, lorry, diesel, 40t gross weight, 2006, EURO-IV, long haul (pedigree 95 % interval) | 1.26343 | /3.02 / x3.02 | [pedigree (Annex H)] | -0.2 / +0.6 | 14.2 | | ||
| - | | Nitrogen, liquid, at plant (pedigree 95 % interval) | 8.82203 | /1.13 / x1.13 | [pedigree (Annex H)] | -0.4 / +0.4 | 3.4 | | ||
| - | | Fiber stabilization, | ||
| - | | Exhaust gas treatment 1: electricity_kWh (per kg step output) | 0.023 | 0.02 / 0.0229 | [Benitez A, Wulf C, de Palmenaer A, et al. Ecologic; Benitez2021 benchmark sub-process ‘carbon fiber pr; RSC_ESI_2016 Table 1 ’Abatement system 25 kW’ at 1] | -0.1 / -0.0 | 0.2 | | ||
| - | | Fiber drying and sizing: heat_MJ (per kg step output) | 0.0 | 0.3351 / 0.3351 | [Benitez A, Wulf C, de Palmenaer A, et al. Ecologic] | +0.0 / +0.0 | 0.1 | | ||
| - | |||
| - | ==== 6.4 Consistency check ==== | ||
| - | |||
| - | Final control: 22 item(s) passed; no failure. | ||
| - | |||
| - | ==== 6.5 Uncertainty analysis ==== | ||
| - | |||
| - | Monte Carlo simulation (1000 runs) on the lognormal distributions of all exchanges: | ||
| - | |||
| - | ^ Impact category ^ Median ^ 2.5 % ^ 97.5 % ^ GSD² ^ | ||
| - | | acidification / accumulated exceedance (AE) | 0.1787 | 0.1651 | 0.1938 | 1.08 | | ||
| - | | climate change / global warming potential (GWP100) | 64.2 | 59.83 | 69.43 | 1.08 | | ||
| - | | climate change: biogenic / global warming potential (GWP100) | 0.1823 | 0.1701 | 0.1959 | 1.07 | | ||
| - | | climate change: fossil / global warming potential (GWP100) | 64.01 | 59.65 | 69.23 | 1.08 | | ||
| - | | climate change: land use and land use change / global warming potential (GWP100) | 0.0101 | 0.009208 | 0.01152 | 1.12 | | ||
| - | | ecotoxicity: | ||
| - | | ecotoxicity: | ||
| - | | ecotoxicity: | ||
| - | | energy resources: non-renewable / abiotic depletion potential (ADP): fossil fuels | 985.9 | 909.4 | 1073 | 1.09 | | ||
| - | | eutrophication: | ||
| - | | eutrophication: | ||
| - | | eutrophication: | ||
| - | | human toxicity: carcinogenic / comparative toxic unit for human (CTUh) | 2.279e-08 | 2.11e-08 | 2.461e-08 | 1.08 | | ||
| - | | human toxicity: carcinogenic, | ||
| - | | human toxicity: carcinogenic, | ||
| - | | human toxicity: non-carcinogenic / comparative toxic unit for human (CTUh) | 5.022e-07 | 4.606e-07 | 5.454e-07 | 1.09 | | ||
| - | | human toxicity: non-carcinogenic, | ||
| - | | human toxicity: non-carcinogenic, | ||
| - | | ionising radiation: human health / human exposure efficiency relative to u235 | 9.82 | 9.199 | 10.55 | 1.07 | | ||
| - | | land use / soil quality index | 151.6 | 140.3 | 163.6 | 1.08 | | ||
| - | | material resources: metals/ | ||
| - | | ozone depletion / ozone depletion potential (ODP) | 1.082e-06 | 9.952e-07 | 1.179e-06 | 1.09 | | ||
| - | | particulate matter formation / impact on human health | 1.494e-06 | 1.381e-06 | 1.631e-06 | 1.09 | | ||
| - | | photochemical oxidant formation: human health / tropospheric ozone concentration increase | 0.1213 | 0.1126 | 0.1307 | 1.08 | | ||
| - | | water use / user deprivation potential (deprivation-weighted water consumption) | 5.496 | 5.098 | 5.949 | 1.08 | | ||
| - | |||
| - | ==== 6.6 Comparison with other data ==== | ||
| - | |||
| - | ^ Source ^ Scope ^ Value (GWP100 or energy) ^ This dataset ^ Ratio ^ Explanation ^ | ||
| - | | [BAFU 2026 dataset] | Carbon fiber, weaved, at factory (RER), cradle-to-gate incl. weaving | 51.5 kg CO2-eq | 64.1 | 1.25 | BAFU analog (Benitez 2021 inventory); includes weaving | | ||
| - | | [tdc dataset] | cf-v2-im-rer (same product, other region) | 51 kg CO2-eq | 64.1 | 1.26 | regional variant (electricity, | ||
| - | | [tdc dataset] | cf-v2-im-rna (same product, other region) | 52.6 kg CO2-eq | 64.1 | 1.22 | regional variant (electricity, | ||
| - | | [Benitez et al. 2021] | electricity, | ||
| - | |||
| - | ==== 6.7 Conclusions, | ||
| - | |||
| - | GWP100 64.1 kg CO2-eq per kg (95 % interval 59.8–69.4). Dominant contributors: | ||
| - | |||
| - | ===== 7 Critical review ===== | ||
| - | |||
| - | //Reserved for the external reviewer (ISO 14044 clause 6; ISO/TS 14071 (//ISO/TS 14071:2014 Environmental Management — Life Cycle Assessment — Critical Review Processes and Reviewer Competencies// | ||
| - | |||
| - | ^ Reviewer comment ^ Response ^ Change in the dataset ^ | ||
| - | | | | | | ||
| - | |||
| - | ===== 8 References ===== | ||
| - | |||
| - | BAFU (graph). 2026. //BAFU 2026 Carbon Fiber Production Sub-Processes (Stabilization/ | ||
| - | |||
| - | Bell, Caleb. 2016a. //Fluids: Fluid Dynamics Component of Chemical Engineering Design Library (ChEDL)//. Released. [[https:// | ||
| - | |||
| - | Bell, Caleb. 2016b. //Thermo: Chemical Properties Component of Chemical Engineering Design Library (ChEDL)//. Released. [[https:// | ||
| - | |||
| - | Commission Recommendation (EU) 2021/2279 of 15 December 2021 on the Use of the Environmental Footprint Methods to Measure and Communicate the Life Cycle Environmental Performance of Products and Organisations, | ||
| - | |||
| - | Dér, A., and et al. 2021. ‘Modelling and Analysis of the Energy Intensity in Polyacrylonitrile (PAN) Precursor and Carbon Fibre Manufacturing’. //Journal of Cleaner Production// | ||
| - | |||
| - | European Commission, Joint Research Centre. 2022. // | ||
| - | |||
| - | Frischknecht, | ||
| - | |||
| - | Hao X, Li R, Wang J, Yang X. 2018. //Numerical Simulation of a Regenerative Thermal Oxidizer for Volatile Organic Compounds Treatment// | ||
| - | |||
| - | //ISO 14040:2006 Environmental Management — Life Cycle Assessment — Principles and Framework (Incl. Amd 1:2020)//. 2006. International Organization for Standardization. | ||
| - | |||
| - | //ISO 14044:2006 Environmental Management — Life Cycle Assessment — Requirements and Guidelines (Incl. Amd 1:2017, Amd 2:2020)//. 2006. International Organization for Standardization. | ||
| - | |||
| - | //ISO/TS 14071:2014 Environmental Management — Life Cycle Assessment — Critical Review Processes and Reviewer Competencies// | ||
| - | |||
| - | Khayyam, H., and et al. 2021. ‘Improving Energy Efficiency of Carbon Fiber Manufacturing Through Waste Heat Recovery: A Circular Economy Approach with Machine Learning’. //Energy// 225: 120113. [[https:// | ||
| - | |||
| - | Lenter, E., and et al. 2023. //Is the Use of Bio-Based Raw Materials in Carbon Fibre Production the Route for More Sustainable and Cheaper Carbon Fibres?// [[https:// | ||
| - | |||
| - | Morishita, Y., and et al. 2025. ‘Carbon Fibre Production Using an Ecofriendly Water-Soluble Precursor’. //Nature Communications// | ||
| - | |||
| - | Mullin, G., and et al. 1998. Process for the preparation of carbon fiber. issued 1998. [[https:// | ||
| - | |||
| - | Mutel, Chris. 2017. ‘Brightway: | ||
| - | |||
| - | Newcomb, S.L., and et al. 2016. ‘Processing, | ||
| - | |||
| - | Paul, Edward L., Victor A. Atiemo-Obeng, | ||
| - | |||
| - | tdc corpus. 2026. // | ||
| - | |||
| - | tdc-calc supply_transport. 2026. //Supply Transport of Purchased Materials (Eurostat Comext 2024 + PEF Legs), RER//. [[https:// | ||
| - | |||
| - | ===== Annex A — Energy consumption model ===== | ||
| - | |||
| - | The tdc energy model computes the heat and electricity demand per functional unit from process physics, in two layers, as process simulators do. | ||
| - | |||
| - | **Layer 1 — thermodynamic duties of each step.** Sensible heat //Q// = //m// // | ||
| - | |||
| - | **Layer 2 — conversion of duties into purchased energy.** Heat supply // | ||
| - | |||
| - | * agitation: //P// = // | ||
| - | * pumps: //P// = // | ||
| - | * vacuum: isothermal compression of the vapour/gas load //P// = // | ||
| - | * cooling: electricity per MJ of heat rejected; installed equipment at part load; plant utilities per tonne, each only with a source. | ||
| - | |||
| - | All expressions are unit-checked with //pint//. Result per kg: heat, electricity, | ||
| - | |||
| - | ^ Parameter ^ Value ^ Unit ^ Source / assumption ^ | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Fiber stabilization, | ||
| - | | [Exhaust gas treatment 1] First off-gas treatment (quench/ | ||
| - | | [Exhaust gas treatment 2 (regenerative thermal oxidizer)] Regenerative thermal oxidizer NG fuel (on-site, 2.06 kg NG per kg product) (duty) | {‘MJ’: 5.9082} | per kg of step output | Sourced on-site RTO fuel (carrier fuel). This plus the step-1 stabilization NG (0.22 kg) = the spec.json stoich NG reactant 2.28 kg per kg product (the on-site fuel combusted in the furnaces/ | ||
| - | | [Exhaust gas treatment 2 (regenerative thermal oxidizer)] RTO fans and blower (off-gas and oxidising-air circulation) (specific) | {‘quantity_per_batch’: | ||
| - | | [Fiber drying and sizing] Sizing-bath water heating (technical drying, recovered closed loop) (loss) | {‘MJ’: 1.2} | per kg of step output | The sizing-bath water is a recovered closed loop: ‘the water evaporates in technical drying, is recovered and fed back; the coating remains on the fiber’ (Prenzel2023 sec 3.1.3). 1.2 MJ per kg product | | ||
| - | | [Fiber drying and sizing] Drying air handling + winding drives (sourced RSC stage powers) (motor) | {‘P_kW’: | ||
| - | |||
| - | ===== Annex B — Stoichiometry specification and balances ===== | ||
| - | |||
| - | < | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | " | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | } | ||
| - | ], | ||
| - | " | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | }, | ||
| - | { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | } | ||
| - | ] | ||
| - | } | ||
| - | </ | ||
| - | |||
| - | ===== Annex C — Transport calculation (raw-material provenance) ===== | ||
| - | |||
| - | Provenance of each raw material in the supply of the region: supply_transport (Eurostat Comext / UN Comtrade provenance shares, PEF legs). Legs: default scenario of the PEF method (Commission Recommendation (EU) 2021/2279 of 15 December 2021 on the Use of the Environmental Footprint Methods to Measure and Communicate the Life Cycle Environmental Performance of Products and Organisations 2021) (European suppliers 130 km truck, 240 km train, 270 km barge; overseas suppliers 1000 km truck plus the sea route from the origin’s main port, computed on the marine network). | ||
| - | |||
| - | ^ Raw material ^ HS code ^ Regional share ^ Overseas share ^ Main partners ^ Mean sea distance (km) ^ Source ^ | ||
| - | |||
| - | ===== Annex D — Source excerpts ===== | ||
| - | |||
| - | Every value taken from a source, with the verbatim passage it relies on (also attached as notes to the references in the Zotero library). | ||
| - | |||
| - | ^ Reference ^ Page / section ^ Excerpt ^ Used for ^ | ||
| - | | (tdc corpus 2026) | Mass Balance Summary | “PAN -> Stabilized 2.78 2.503 10.0%. Stabilized -> LT Carb 2.503 1.252 50.0%. LT Carb -> HT Carb 1.252 0.984 21.4%. HT Carb -> CF 0.984 1.0 (sizing added).” | precursor-> | ||
| - | | (tdc corpus 2026) | Energy Inputs | “Stabilization 18.82. Carbonization LT 4.17. Carbonization HT 8.06. Electrolysis 0.21. Final washing/ | ||
| - | | (tdc corpus 2026) | Natural Gas | “Natural Gas: Stabilization 0.22 kg/kg CF (0.34 m3). Exhaust treatment 2 2.06 kg/kg CF (0.29 m3).” | natural gas for stabilization heating + exhaust-gas abatement: 0.22 + 2.06 = 2.28 kg per 1 kg CF | | ||
| - | | (tdc corpus 2026) | Key Emissions | “HCN 2.35 Stabilization + Carbonization. CO 0.56 Stabilization + Carbonization. NH3 0.22 Stabilization + Carbonization. N2 ~70 Various (inert gas releases). H2O (vapor) ~12 Drying stages. CH4 0.014 Carbonization.” | air emissions per 1 kg CF from stabilization+carbonization (before abatement): HCN 2.35 kg, CO 0.56 kg, NH3 0.22 kg, N2 ~70 kg, H2O ~12 kg, CH4 0.014 kg; full-chain value, precursor-side share assigned to precursor dataset | | ||
| - | | (tdc corpus 2026) | Key Material Inputs | “Nitrogen (liquid) 8.96 kg. Ethylene glycol 0.01 kg. Epoxy resin (sizing) 0.01 kg. Industrial water 48.0 kg. Deionized water 3.1 kg. Compressed air 1.46 Nm3.” | process water make-up ~48 kg, deionized 3.1 kg, nitrogen liquid 8.96 kg (full chain; conversion share estimated), compressed air 1.46 Nm3, sizing 0.01 kg (full chain; BAFU T700G uses 0.0102 kg) | | ||
| - | | (Dér, A. and et al. 2021) | Table 2 + total line energy | “Altogether, | ||
| - | | (Newcomb, S.L. and et al. 2016) | Section 2.1.3 | “Traditional stabilization processes utilize the heat treatment of the fiber in an oxidative environment at temperatures ranging from about 200 C to 300 C while the filaments are subjected to an applied tension.” | stabilization temperature 200-300 C in air, under tension | | ||
| - | | (Newcomb, S.L. and et al. 2016) | Section 2.1.3 | “The stabilized fibers are then carbonized at a temperature range between 700 and 3000 C in an inert atmosphere. The carbonization temperature determines the final structure” | carbonization in inert atmosphere 700-3000 C; IM grade processed up to ~1500 C | | ||
| - | | (Morishita, Y. and et al. 2025) | Table R4 | “PAN: C 67.9 wt%, H 5.7 wt%, N 26.4 wt%, O 0.0 wt%, P 0.0 wt%.” | composition of the dried wet-spun PAN precursor fiber used in spec.json (elemental pseudo-formula) | | ||
| - | | (Morishita, Y. and et al. 2025) | Fig 1c discussion | “Energy consumption of the stabilisation process accounts for ~57% of the total energy consumption, | ||
| - | | (Khayyam, H. and et al. 2021) | Section 4 | “The exhausts gases from the stabilization process such as CO, CO2, and HCN must be burnt in an abatement system to eliminate the emission of toxic fumes into the atmosphere. The burning process requires a temperature of about 850 C.” | off-gas treatment: thermal oxidizer at ~850 C burns CO/CO2/HCN off-gas (destruction of HCN/CO modelled in spec.json reactions) | | ||
| - | | (Lenter, E. and et al. 2023) | LCA section | “An example of intermediate modulus carbon fibres with a Young’s modulus of 277 GPa and a tensile strength of 4300 MPa is presented, where oxidative stabilisation, | ||
| - | | (Lenter, E. and et al. 2023) | sizing section | “Typically, | ||
| - | | (Mullin, G. and et al. 1998) | 0013 | “The oxidation step is conducted in an oxidizing atmosphere, usually air, at a temperature of about 190 C. to about 280 C.” | stabilization in air at 190-280 C (independent patent confirmation of Newcomb 200-300 C) | | ||
| - | | (Mullin, G. and et al. 1998) | 0014 | “The carbonization step which follows the oxidation step is performed rapidly in an inert atmosphere at a temperature of about 1000 C. to about 2000 C.” | carbonization in inert atmosphere 1000-2000 C; IM grade within range (final ~1500 C) | | ||
| - | | (tdc corpus 2026) | Energy Inputs | “Energy Inputs (per kg CF): Electricity Stage kWh/kg CF. … Stabilization 18.82. Carbonization LT 4.17. Carbonization HT 8.06. Electrolysis 0.21. Final washing/ | ||
| - | | (tdc corpus 2026) | Heat (Steam) / Natural Gas | “Heat (Steam) Stage kg steam/kg CF. … Carbonization LT 1.86. TOTAL ~12.7 kg/kg CF. Natural Gas: Stabilization 0.22 kg/kg CF. Exhaust treatment 2 2.06 kg/kg CF. Energy Conversion: Steam ~2.7 MJ/kg.” | heat exchange 56.5 MJ/kg = EGT NG 2.06 kg x 22.8 MJ/kg + carbonization steam 1.86 kg x 2.7 MJ/kg, net of furnace efficiency 0.92 | | ||
| - | | (Newcomb, S.L. and et al. 2016) | Chapter 4 (processing) | “Traditional stabilization processes utilize the heat treatment of the fiber in an oxidative environment at temperatures ranging from about 200 C to 300 C while the filaments are subjected to an applied tension.” | stabilization in air/ | ||
| - | | (Hao X, Li R, Wang J, Yang X 2018) | Abstract | “The VOCs removal rate in this study was constantly above 98%, and the average thermal efficiency reached 90%.” | off-gas (EGT) destruction efficiency: two regenerative-oxidizer stages, each >98% VOC removal (Hao 2018) -> overall ~99.96% used as 99% DRE; toxic residuals <10 g/kg | | ||
| - | | (BAFU (graph) 2026) | BAFU dataset ‘fiber stabilization, | ||
| - | | (BAFU (graph) 2026) | BAFU dataset ‘exhaust gas treatment 2’ | “Natural gas, from medium pressure network (0.1-1 bar), at service station 0.1908 kg; Nitrogen oxides 0.009991 kg to air; Carbon dioxide, fossil 0.702 kg; Water 0.474 kg; Nitrogen 3.441 kg.” | off-gas treated by thermal oxidation: NG 0.1908 kg support fuel, CO2 0.702 + H2O 0.474 + N2 3.441 kg combustion products, NOx 0.00999 kg residual per kg CF (BAFU EGT2) -> supports post-EGT off-gas composition | | ||
| - | | (tdc-calc supply_transport 2026) | Result | “The ship leg (6.63 tkm) is driven by the extra-EU import shares of ammonium bicarbonate (57.4% extra-EU, CN 47.7%) and nitrogen (5.5% extra-EU); BAFU T700G analog datasets carry a smaller single-mode lorry/rail allocation, so the total tkm here is higher than those datasets.” | transport crosscheck deviation: PEF/ | ||
| - | | (tdc corpus 2026) | Natural Gas | “Natural Gas: Stabilization 0.22 kg/kg CF (0.34 m3). Exhaust treatment 2 2.06 kg/kg CF (0.29 m3).” | natural gas input 2.28 kg/kg CF (stabilization 0.22 + EGT 2.06) -> 51.98 MJ; CO2 9.69 kg off-gas includes EGT combustion; corrected after second-model review | | ||
| - | | (tdc corpus 2026) | Mass Balance Summary | “PAN -> Stabilized 2.78 2.503 10.0%. Stabilized -> LT Carb 2.503 1.252 50.0%. LT Carb -> HT Carb 1.252 0.984 21.4%. HT Carb -> CF 0.984 1.0 (sizing added).” | precursor-> | ||
| - | | [Benitez2021] | see RER snippet | “Per-step LCI inventory (workbook lci-carbon-fiber.xlsx) of Toray T700G PAN-based carbon fibre production, based on Ellringmann 2016, Gill 2016, Muetzel 2012. The carbon-fibre heat-treatment chain is split into per-sub-process inventories (per kg of each sub-process’s own output).” | shared with sibling cf-v2-im-rer (grade/ | ||
| - | | [RSC_ESI_2016] | see RER snippet | “The energy consumption of our 100 tons per year pilot line displayed on Figure 1 was measured by the Carbon Nexus production facility” | shared with sibling cf-v2-im-rer (grade/ | ||
| - | | [Prenzel2023] | see RER snippet | “a plausible average value for the total energy demand for the production of 12 k and 24 k HT-fibers was determined to be 170 MJ of thermal and electric per kg carbon fiber” | shared with sibling cf-v2-im-rer (grade/ | ||
| - | | (tdc corpus 2026) | see RER snippet | “PAN -> Stabilized 2.78 2.503 10.0%. Stabilized -> LT Carb 2.503 1.252 50.0%. LT Carb -> HT Carb 1.252 0.984 21.4%. HT Carb -> CF 0.984 1.0 (sizing added).” | shared with sibling cf-v2-im-rer (grade/ | ||
| - | | [supply_transport_ras_2024] | supply_transport detail, region=RAS | “Result (tkm per kg product): lorry 1.263426 -> BAFU ‘Transport, | ||
| - | |||
| - | ===== Annex E — Independent second-model review ===== | ||
| - | |||
| - | ^ # ^ Severity ^ Exchange ^ Finding ^ Answer / change ^ | ||
| - | | 1 | medium | Methane (to air) | The amount in exchanges (0.001444 kg) does not match the amount in spec.json (0.001717 kg). | Not an error. spec.json ‘mol’ fields are the RAW input estimates fed to the deterministic stoich tool; the posted exchanges are the tool’s balance-closed amounts. Re-running ‘stoich spec.json’ today (no post) reproduces the LCI amounts EXACTLY (CH4 0.001444, C2H4 0.001366, C2H6 0.001314 kg/kg CF) wi | | ||
| - | | 2 | medium | Ethylene (to air) | The amount in exchanges (0.001366 kg) does not match the amount in spec.json (0.001711 kg). | Not an error. The LCI amount 0.001366 kg/kg CF is the deterministic stoich tool’s balance-closed output, not the raw spec input: re-running ‘stoich spec.json’ on the current spec (verified today, no post) reproduces the LCI value exactly and closes all element balances (C -0.0 %, H -0.001 %, N 0.0 % | | ||
| - | | 3 | medium | Ethane (to air) | The amount in exchanges (0.001314 kg) does not match the amount in spec.json (0.001714 kg). | Not an error. Same mechanism as findings 1-2: the LCI amount 0.001314 kg/kg CF is the deterministic stoich tool’s balance-closed output for the current spec.json (re-run verified today: reproduces the LCI values exactly, C/ | ||
| - | | 4 | low | Carbon monoxide, fossil (to air) | Pedigree score for Carbon monoxide (reliability 4) is inconsistent with the ‘why’ reason which cites a 99% DRE (destruction removal efficiency) from a source (Hao 2018), which is a technology/ | ||
| - | |||
| - | ===== Annex F — Cross-check with independent data ===== | ||
| - | |||
| - | Independent analogs (BAFU): [‘Carbon fiber production, fiber stabilization, | ||
| - | |||
| - | ^ exchange / class ^ this dataset (per kg) ^ independent value(s) ^ source ^ status ^ | ||
| - | | electricity | 28.8 | 0.02621 - 28.23 | Carbon fiber production, fiber stabilization, | ||
| - | | transport | 8.026 | 0.007105 - 1.26 | Carbon fiber production, fiber stabilization, | ||
| - | | water | 8.114e-05 | 8.114e-05 - 0.0002505 | Carbon fiber production, fiber stabilization, | ||
| - | | Tap water, at user | 0.61 | 0.6109 kg | BAFU ’Carbon fiber production, fiber stabilization, | ||
| - | | Water, deionised, at plant | 8.114e-05 | 8.114e-05 kg | BAFU ’Carbon fiber production, fiber stabilization, | ||
| - | | Electricity, | ||
| - | | Heat, natural gas, at heat plant | 69.380646 | 69.380646 MJ | tdc energy model v3.1 (energy.json) fuel_heat per_kg_product | ok | | ||
| - | | electricity vs energy.json | 28.8 | 28.8 kWh | tdc energy model | ok | | ||
| - | |||
| - | === 8.0.1 Justified deviations (with evidence) === | ||
| - | |||
| - | * transport: PEF/ | ||
| - | * energy-divergence Exhaust gas treatment 2 (regenerative thermal oxidizer): RTO fan electricity 0.0262 kWh per kg off-gas vs the RSC_ESI_2016 independent value 0.1885 (x0.139): the RSC figure is the WHOLE abatement train of the 100 t/a pilot line (first treatment + RTO + post-treatment, | ||
| - | * energy-divergence Fiber drying and sizing: The model heat_MJ = 0 vs the Benitez benchmark 0.335 MJ steam: the sizing-bath water heating and the drying-air/ | ||
| - | * family-trend: | ||
| - | |||
| - | Open flags: none | ||
| - | |||
| - | ===== Annex G — Files, tools and audit trail ===== | ||
| - | |||
| - | ^ Item ^ File / tool ^ Version / date ^ | ||
| - | | spec.json | / | ||
| - | | energy.json | / | ||
| - | | energy_result.json | / | ||
| - | | snippets.json | / | ||
| - | | board.json | / | ||
| - | | review.json | / | ||
| - | | lcia.json | / | ||
| - | | cf-v2-im-ras.ecospold | / | ||
| - | | tdc-doc | / | ||
| - | |||
| - | ===== Annex H — BAFU DQR v2.1 documentation fields (EcoSpold v1 metadata) ===== | ||
| - | |||
| - | ^ DQR field ^ Content ^ | ||
| - | | name | Carbon fiber, PAN-based, wet spinning, IM, RAS | | ||
| - | | location | RAS | | ||
| - | | unit | kg | | ||
| - | | time period | 2020-2025, reference year 2024 | | ||
| - | | geography | Asia | | ||
| - | | technology | Conversion of 1 kg of wet-spun PAN precursor fiber into 1 kg of sized, intermediate modulus (IM) carbon fiber: stabilization (oxidation in air), low- and high-temperature carbonisation, | ||
| - | | included processes | Fiber stabilization, | ||
| - | | representativeness | Section 3 | | ||
| - | | sources | 15 references (Annex D, References) | | ||
| - | | data generator | tdc pipeline | | ||
| - | | validation | tdc-doc final control: ready for external review | | ||
| - | |||
| - | ---- | ||
| - | |||
| - | Comments are welcome from registered users and appear below once the BAFUquery team has reviewed them. To suggest a dataset that does not exist yet, use [[proposals: | ||
| - | |||
| - | ~~DISCUSSION~~ | ||
datasets/tdc/c724fe59-4f68-5735-a13e-4edb0d44388d.1794827524.txt.gz · Last modified: by 127.0.0.1
